8 SECTION 00 - SAFETY RULES
PREVENTION OF FIRE OR EXPLOSIONS
The engine fuel can originate an explosion or a fire.
Never refuel when the engine is running.
Do not smoke during refuelling.
Take all the necessary safety measures when weld-
ing, grinding or when working near a naked flame.
Use a non-inflammable product for cleaning parts.
A spark or a flame can cause the electrolyte of the
battery to explode.
To prevent any risk of explosion, observe the follow-
ing instructions:
- when disconnecting the battery cables, always
disconnect the negative (-) cable first;
- to reconnect the battery cables, always connect
the negative (-) cable last;
- never short-circuit the battery clamps with metal
objects;
- do not weld, grind or smoke near a battery.
The engine exhaust may produce sparks.
Before using the machine in an area which may
contain inflammable vapours, ensure that there is
good ventilation.
Always keep a fire extinguisher available on the
machine.
Make sure that it is properly maintained in conform-
ity with the manufacturer’s instructions.
To Next Page
Loading...
