Need help?Do you have a question about the New Holland Boomer 25 Tier 3 and is the answer not in the manual?
General| Brand | New Holland |
|---|---|
| Model | Boomer 25 Tier 3 |
| Category | Tractor |
| Language | English |
Information concerning adjustment and maintenance of new equipment.
Details on the tractor's designed purpose and limitations.
Guidelines for add-on equipment to avoid interference.
Location and importance of the tractor's identification plates.
Instructions for keeping the manual accessible for all operators.
Defines left, right, front, and rear views of the tractor.
Explains DANGER, WARNING, CAUTION, NOTICE, and NOTE signal words for hazard communication.
General safety rules for operating the tractor safely.
Procedures and precautions for safely starting the tractor.
Procedures and precautions for safely stopping the tractor.
Information about tags used for disabling equipment.
Environmental considerations for tractor operation.
Identification and meaning of various safety signs on the machine.
Identification and meaning of instructional signs on the machine.
Explanation of common international symbols used in the manual.
Details about safety features incorporated into the tractor design.
Steps to safely access the operator's platform.
Details on the operator's seat, including belt and adjustment.
Importance and use of the seat belt.
How to adjust the operator's seat.
Information about the ROPS and its function.
Identification and function of controls located at the front.
Overview of the tractor's instrument panel indicators.
Operation of the clutch pedal.
Operation of the brake pedals.
Function and operation of the park brake.
Operation of the foot throttle pedal.
Operation of the hand throttle lever.
Operation of the PTO engagement switch.
Function of the tractor's key switch.
Operation of the differential lock pedal.
Operation of the multifunction light switch.
Identification and function of controls on the left side.
Operation of the transmission range lever.
Operation of the four-wheel drive system.
Identification and function of controls on the right side.
Operation of the main transmission shift lever.
Operation of the hydraulic power lift system.
Adjustment of the HPL drop rate.
Operation of optional rear hydraulic valves.
Operation of optional mid-mount hydraulic valves.
Operation of the PTO speed selection lever.
Identification and function of external controls.
Location and operation of the hood latch.
Initial setup and procedures before first use.
Recommended procedure for breaking in the engine.
Safe operation of the Power Take-Off system.
Operation and use of the three-point hitch.
How to adjust the three-point hitch.
Information about the tractor's drawbar.
Operation of the hydraulic lift control.
Procedures for starting the tractor.
Using the key switch to start the engine.
Use of aids for starting in cold weather.
Step-by-step guide to starting the engine.
Procedure for jump-starting the tractor.
Procedures for stopping the tractor.
Correct procedure to stop the engine.
Methods for emergency shutdown.
Use of service brakes for stopping.
Engaging and disengaging the park brake.
Instructions for operating the tractor while moving.
How to steer the tractor.
Special considerations for operating in cold weather.
How the mechanical transmission works.
Procedures for safely parking the tractor.
Final steps for parking the tractor.
Regulations and procedures for transporting on roads.
Requirements for lighting during transport.
How to use hazard lights.
How to use turn signals.
How to operate work lights.
How brake lights function.
Operation of optional rear work lights.
Safe driving practices for the tractor on roads.
Procedures for shipping the tractor.
Securing the tractor for transport.
Procedures for recovering a disabled tractor.
Safe methods for towing the tractor.
General information about working operations.
Importance and methods of tractor ballasting.
Details on using ballasting weights.
General guidance for maintenance.
Overview of maintenance procedures.
Recommended torque values for assembly.
Torque specifications for hydraulic systems.
Information on using biodiesel fuel.
Specifications for diesel fuel.
Safe procedures for refueling.
Locations for safely lifting the tractor.
Types and specifications of fluids and lubricants.
Fluid capacities for various tractor systems.
Information on OAT coolant.
Recommended engine oils.
Schedule and planning for maintenance tasks.
Overview of the maintenance schedule.
Daily maintenance checks.
Procedure for checking engine oil level.
Procedure for checking the cooling system.
Initial maintenance after 50 hours.
Procedure for changing engine oil and filter.
Procedure for replacing the fuel filter.
Procedure for replacing the hydraulic oil filter.
Inspection of the ROPS.
Checking wheel bolts and nuts.
Maintenance tasks required every 50 hours.
Lubrication of grease fittings.
Checking transmission fluid level.
Adjusting brake pedal free play.
Inspecting the fan belt.
Checking tire pressure.
Checking front axle differential fluid level.
Cleaning the air cleaner.
Maintenance tasks required every 100 hours.
Draining the fuel filter water separator.
Maintenance tasks required every 300 hours.
Procedure for changing engine oil and filter.
Procedure for replacing the hydraulic oil filter.
Procedure for replacing the fuel filter.
Adjusting the fan belt.
Inspection of the ROPS.
Checking wheel bolts and nuts.
Checking front wheel alignment.
Replacing the air cleaner element.
Maintenance tasks required every 600 hours.
Changing front axle differential oil.
Changing transmission fluid.
Maintenance tasks required every 1000 hours.
Changing engine coolant.
Other general maintenance tasks.
Bleeding the fuel injection system.
Bleeding fuel injectors.
Adjusting the fan belt.
Inspection of the ROPS.
Testing the battery.
Checking the alternator and drive belt.
Checking fuses.
Replacing maxi fuses.
Replacing headlight bulbs.
Replacing tail/brake light bulbs.
Replacing turn signal/hazard bulbs.
Checking wheel bolts and nuts.
Checking front wheel alignment.
Adjusting brake pedal free play.
Adjusting clutch pedal free play.
Procedures for storing the tractor.
Steps to prepare the tractor for storage.
Steps for removing the tractor from storage.
Troubleshooting based on observed symptoms.
Diagnosing and resolving engine issues.
Diagnosing and resolving brake system issues.
Diagnosing and resolving pressure system issues.
Diagnosing and resolving steering issues.
Diagnosing and resolving electrical system issues.
Recommended tire pressures for operation.
General technical specifications of the tractor.
Physical dimensions of the tractor.
Owner's copy of the predelivery report.
Dealer's copy of the predelivery report.
To Next Page