Need help?Do you have a question about the New Holland Boomer 8N and is the answer not in the manual?
General| Transmission Type | Hydrostatic |
|---|---|
| Number of ranges | 3 |
| Brakes | Wet disc |
| Hydraulic Type | Open center |
| 3-Point Hitch | Category I |
| PTO | Independent |
| Engine Type | Diesel |
| Steering | Power steering |
| Rear PTO Speed | 540 rpm |
| Mid PTO Speed | 2000 rpm |
Provides technical information for servicing the Boomer 8N CVT transmission.
Explains safety alert symbols and signal words (DANGER, WARNING, CAUTION) for hazard identification.
Defines the use of "NOTICE" for machine safety and supplementary information.
Covers metric hardware, plating, nut tightening, locknuts, jam nuts, and thread lubrication.
Provides 9 safety instructions for tractor operation and maintenance.
Outlines checks before starting the engine and safe starting practices.
Provides advice on speed, turns, downhill operation, and stability.
Details how to safely tow implements and trailers.
Covers safe connection and operation of implements.
Explains how to safely stop the engine and park the tractor.
Advises on safety during maintenance, tire work, hydraulics, and cooling system.
Provides guidelines for safe handling and use of diesel fuel.
Explains important safety decals and their meanings for operator safety.
Details the function and location of various instruction decals on the tractor.
Details decals for air cleaner, throttle, reflective tape, parking brake, and fuel.
Details the transmission controls decal and the Boomer 8N model emblem.
Discusses pre-delivery service checks and the location of the product identification plate.
Explains various universal symbols used on tractor controls, switches, and fuse boxes.
Lists engine type, horsepower, cylinders, bore, stroke, displacement, and fluid capacities.
Details specifications for cooling, electrical, and fuel systems.
Lists specifications for brakes, steering, power take-off, and hydraulic lift systems.
Specifies the transmission type and lists forward/reverse speeds.
Covers weights, drawbars, hitch, tires, and wheel bolt torques.
Provides general dimensions, ground clearance, heights, and wheel tread settings.
Provides minimum tightening torques for metric and inch hardware.
Lists specialized tools, lubricants, and tire pressure/ballast recommendations.
To Next Page