Need help?Do you have a question about the New Holland CX780 and is the answer not in the manual?
General| Brand | New Holland |
|---|---|
| Model | CX780 |
| Category | Farm Equipment |
| Language | English |
Describes the primary purpose and design of CX combine harvesters for agricultural use.
Step-by-step guide for safely starting the combine engine and preparing for operation.
Covers essential safety procedures and operational guidelines for the combine.
Emphasizes the importance of following the maintenance schedule for machine longevity.
Highlights hazards associated with batteries and necessary safety precautions.
Outlines safety standards and procedures for hydraulic systems and components.
Details the various controls and instruments located within the operator's cab.
Describes the monitor's location, function, and control interface for machine parameters.
Explains installation and usage of the data logger and card for field data.
Describes the system for selecting up to three operating modes per crop.
Provides information on the various combine operational parameters and status.
Details how to configure machine settings and perform essential calibrations.
Incorporates troubleshooting routines for electric and electronic system faults.
Provides access to information on active alarms, errors, and service data.
Covers pre-operation checks for chains, belts, pressures, and fluid levels.
Provides a step-by-step guide for safely starting the engine and checking indicators.
Offers guidance on selecting gears, steering, and safe driving characteristics.
Explains how to select gears electronically and manually, including parking brake engagement.
Details the combine's five basic functions: Feeding, Threshing, Separation, Cleaning, Storage/Unloading.
Covers procedures for attaching and detaching the header to the combine unit.
Explains how to adjust drum speed electro-hydraulically via the operator's platform.
Provides steps to clear a blocked drum, including using the drum socket wrench.
Describes how to adjust concave clearance for different crop types.
Details the separation process involving the beater and rotary separator.
Covers cleaning shoe operation and removable grain pan procedures.
Explains how to engage the straw chopper and associated safety notes.
Covers coolant level checks, changes, and system capacity specifications.
Includes fuel level checks, filling procedures, and fuel specifications.
Details daily draining of water and procedures for changing the prefilter/water separator.
Provides instructions for cleaning the air filter element with compressed air.
Details oil reservoir checks, oil and filter changes, and capacities.
Covers engine gearbox oil level checks and oil/filter change procedures.
Details oil level checks and oil change procedures for the traction gearbox.
Covers oil level checks and oil change procedures for final drive gearboxes.
Provides information on brake fluid level, fluid change, capacity, and specification.
Guides on checking and adjusting drive belts and chain tensions for optimal operation.
Details procedures for adjusting the anti-dust plate and drum/concave settings.
Covers sieve installation, removal, and types available.
Explains moisture sensor function, cleaning, and calibration requirements.
Details cleaning and calibration procedures for the grain flow sensor.
Troubleshoots concerns related to irregular feeding and material backfeed.
Addresses issues with grain not properly threshed and material wrapping around the drum.
Troubleshoots concerns about excessive cracked grain, grain loss over sieves, and excessive tailings.
Covers common machine blockages caused by feeding, belts, or broken parts.
Troubleshoots common engine issues like failure to start, low power, or overheating.
Addresses concerns about chopper vibration, poor chop quality, and engagement issues.
Provides instructions for manually releasing the hydraulic parking brake.
Follows steps for end-of-season maintenance to ensure good condition for next season.
Outlines steps for seasonal checks and adjustments to prepare the machine for use.
Covers accessories for straw handling, including chaff blowers and spreaders.
Equipment fitted on grain elevator to check grain moisture in real time.
Equipment to check mass flow in real time.
Includes (Differential) Global Positioning System unit for yield mapping.
Allows automatic steering along crop edges for various crops.
Provides approximate specifications for tyres, including approved sizes and pressure.
Specifies torque values for traction and steering wheel nuts.
Presents technical data for headers, straw elevator, threshing drum, and concave.
Details steering axle positions and track width for different models and tyre setups.
Checklist for customer required adjustments and services after the first 50 hours.
Checklist for dealer required adjustments and services after the first 50 hours.
To Next Page
