New Holland CR8.90 User Manual

Part number 47956065
2
nd
edition English
May 2016
Replaces part number 47869947
SERVICE MANUAL
CR8.90 / CR9.90 / CX8.90
Tier 4A
CR8.90 PIN 1946 and above, CR9.90 PIN 1947 and above,
CX8.90 PIN 1962 and above
CR10.90 / CX8.80
Tier 4B (final)
CR10.90 PIN 1947 and above, CX8.80 PIN 1957 and above
Combine
Printedin U.S.A.
© 2016 CNH Industrial Belgium N.V. All Rights Reserved.
NewHolland is a trademark registered in the United States and many other countries,
owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.

New Holland CR8.90 Specifications

General

Brand	New Holland
Model	CR8.90
Category	Farm Equipment
Language	English

Summary

Introduction

Foreword and Servicing Notices

Explains the importance of qualified personnel and adherence to instructions for repairs and maintenance.

Owner Notes and Information

Provides information on engine repair and fault code resolution, directing users to other manuals or tools.

Safety Rules and Precautions

Outlines general safety guidelines, personal protective equipment (PPE), and accident prevention measures.

Basic Instructions and Procedures

Details procedures for shimming, installing rotating shaft seals, O-ring seals, sealing compounds, and cotter pins.

Torque Specifications

Provides minimum hardware tightening torques for metric fasteners and visual guides for identification.

Conversion Factors

Lists conversion factors for length, area, volume, mass, torque, power, pressure, temperature, flow, and speed.

Product Identification

Explains how to identify the combine and engine using Product Identification Numbers (PINs) and their locations.

Engine

Engine and Crankcase Overview

Introduces the Engine and Crankcase section, detailing its components and their identification.

Engine Removal Procedure

Details the step-by-step procedure for removing the engine from the combine.