New Holland Haybine 472 User Manual

New Holland
Haybine
®
Mower-Conditioner Specifications
472 488 499
Page 1 of 2
MODEL 472 488 499
C
UTTERBAR WIDTH, ft. in. (mm) 7’3” (2210) 9’3” (2819) 12’3” (3734)
OVERALL WIDTH
Operating, ft. in. (mm) 11’11” (3632) 13’8-1⁄4” (4172) 19’8” (5994)
Transport, ft. in. (mm) 10’4-3⁄4”(3168) 12’2” (3708) 13’9” (4191)
OVERALL LENGTH
Operating, ft. in. (mm) 13’1” (3988) 13’4” (4064) 16’8” (5080)
Transport, ft. in. (mm) 13’1” (3988) 13’4” (4064) 21’6” (6553)
HEIGHT
Operating, ft. in. (mm) 3’5-3⁄4” (1060) 3’6” (1067) 6’2-1⁄2” (1892)
Raised, ft. in. (mm) 4’8” (1422) 5’7” (1702) 6’8-1⁄2” (2045)
WEIGHT, lbs. (kg) 2110 (957) 2763 (1253) 4480 (2032)
DRIVE 540 rpm PTO 540 rpm PTO 540 or 1000 rpm PTO
hydrostatic system
TRACTOR REQUIREMENT 30-hp (22.4 kw) or greater 35-hp (26.1 kw) or greater 60-hp (45 kw) or greater with
with standard ASAE hitch with standard ASAE hitch standard ASAE hitch and PTO
and PTO locations and PTO locations locations.
Two remote hydraulic systems
required capable of 1750 psi
(12066 kpa).
HEADER FLOTATION Full, lateral Full, lateral Full, lateral, independent
of conditioning rolls
HEADER LIFT
Guard points maximum lift, in. (mm) 18-1⁄2 (470) 19 (483) 19-1⁄2 (495)
REEL 4-tine bar 4-tine bar Rolareel
Peripheral speed, mph (kph) 6.2 to 8.2 (10.4 to 13.2) 6.5 to 8.6 (10.5 to 13.8) standard—4.8 to 7.9
(7.7 to 12.7) with reduction
kit—4.0 to 6.6 (6.5 to 10.7)
Diameter (maximum), ft. in. (mm) 3’6-1⁄4” (1073) 3’6-1⁄4” (1073) 3’7-1⁄2” (1105)
CUTTERBAR
Knives Bolted, over-serrated Bolted, over-serrated Two opposing assemblies —
sections sections bolted over-serrated sections,
adjustable hold-downs
Guards Twin-forged steel, double- Twin-forged steel, double- Twin-forged steel, double-
hardened or stub guards hardened or stub guards hardened or stub guards
Cutting height, in. (mm) Adjustable from 1-1⁄4 to 4-1⁄4 Adjustable from 1-1⁄4 to 4-1⁄4 Adjustable from 1-1⁄4 to 6-1⁄4
(32 to 108) (32 to 108) (32 to 159)
SICKLE DRIVE wobble joint wobble joint enclosed gearbox
Speed, spm 1632 1632 1700
Stroke, in. (mm) 3 (76) 3 (76) 3 (76)

New Holland Haybine 472 Specifications

General

Brand	New Holland
Model	Haybine 472
Category	Lawn Mower Accessories
Language	English

Summary

New Holland Haybine Mower-Conditioner Specifications

Cutterbar Width

Specifies the cutterbar width in feet and inches (mm) for each model.

Overall Width

Details the operating and transport overall width in feet and inches (mm).

Overall Length

Provides operating and transport overall length in feet and inches (mm).

Height

Lists operating and raised height dimensions in feet and inches (mm).

Weight

Specifies the weight of the mower-conditioner in pounds (lbs.) and kilograms (kg).

Drive System

Details the PTO speed requirements (e.g., 540 rpm) for the mower-conditioner.

Tractor Requirement

Outlines minimum tractor horsepower, hydraulic systems, and PTO locations.

Header Flotation

Describes the header's ability to follow ground contours for even cutting.

Header Lift

Indicates the maximum lift height of the header guard points.

Reel Specifications

Details the reel type, peripheral speed, and maximum diameter.

Cutterbar Details

Describes cutterbar construction, knives, guards, and cutting height adjustment.

Sickle Drive

Specifies the sickle drive type, speed in SPM, and stroke length.

Conditioner Specifications

Conditioner Roll Details

Describes the conditioner roll type, length, diameter, drive, and pressure.

Material Discharge

Details the adjustable gate settings for material discharge.

Operating and Transport Speed

Specifies the maximum operating and safe transport speeds in mph (kph).

Tire Specifications

Lists the tire sizes and types used on the mower-conditioner.

Hydraulic Cylinders

Identifies the hydraulic cylinder features, such as header lift and tongue shift.

Optional Equipment

Lists available optional equipment and features for the mower-conditioner.