New Holland
Haybine
®
Mower-Conditioner Specifications
H7150
Page 1 of 1
MODEL WIDTHS 14-foot 16-foot 18-foot
C
utting width, ft. in. (m) 14'3" (4.34) 16'3" (4.95) 18'3" (5.56)
Overall width, ft. in. (m) 16'3" (4.95) 18'3" (5.56) 20'3" (6.17)
Weight, header and trailframe, lb. (kg) 6,825 (3096) 7,045 (3196) 7,345 (3332)
TRACTOR HOOKUP .................................................New patented, tongue-mounted, swiveling pump with standard 1000-rpm, telescoping PTO hookup....................................
CUTTERBAR
Type ............................................................................................................................Timed, dual, counter-stroking sickles......................................................................................
Knives......................................................................................................................................Over-serrated, bolted ..................................................................................................
Guards ................................................................................................................................Two-tine, double-hardened..............................................................................................
Cutting angle, degrees............................................................................................................-6 to -12, hydraulic tilt .................................................................................................
Cutting height, in. (mm) .........................................................................................................1.2 to 6.2 (30 to 157)..................................................................................................
Skid shoes...............................................................................................................................................4 ..................................................................................................................
SICKLE DRIVE
Type ..........................................................................................................................................Open, dual wobble ....................................................................................................
Sickle speed, spm ................................................................................................................................1810 ...............................................................................................................
Knife stroke, in. (mm) .........................................................................................................................3 (76) ..............................................................................................................
REEL
Type ..............................................................................................................................................5-bat, all steel..............................................................................................
Adjustments..............................................................................................................................Fore/aft and vertical ..............................................................................................
Speed...................................................................................................................................................52-83 ..............................................................................................................
Speed Adjustment........................................................................................................................Variable sheave.......................................................................................................
Diameter, in. (mm)...........................................................................................................................42 (1067) ...........................................................................................................
Drive..............................................................................................................................................Belt and chain........................................................................................................
Tine Bars .........................................................................................................................................Segmented ..........................................................................................................
Tines...................................................................................................................................................Full-flex.............................................................................................................
Bushings/bearings, in. (mm) ......................................................1.25 (31.75) bearing w/collar at cam end and bushings at all other locations......................................................
AUGER
Type ..........................................................................................................................................Single, full floating ....................................................................................................
Diameter, in. (mm) ......................................................................................................................20 (508) overall ......................................................................................................
Floating range, in. (mm)....................................................................................................................2 (50.8).............................................................................................................
Flighting, in. (mm)..............................................................................................................................5 (178) .............................................................................................................
Speed, rpm............................................................................................................................................287 ................................................................................................................
CONDITIONER
Roll length, in. (mm).......................................................................................................................102 (2591) ..........................................................................................................
Roll diameter, in. (mm)................................................................................................................10.375 (263.5) .......................................................................................................
Roll speed, rpm.....................................................................................................................................717 ................................................................................................................
Roll type...............................................................................................................Chevron-design, intermeshing molded rubber...............................................................................
Roll pressure ..........................................................................................................Torsion-bar, single hand-crank adjustment .................................................................................
Roll gap..............................................................................................................................................Wrench.............................................................................................................
Roll drive...........................................................................................................................Spur drive gearbox and PTOs............................................................................................
Crop discharge width, in. (mm) ............................................................................................38 to 96 (965 to 2438).................................................................................................
OPTIONS
• Crop dividers
• Gauge wheel bundle
• Reel-bat truss kit
• High-contact chevron conditioning rolls
• Slatted steel conditioning rolls
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).
Need help?
General
