Need help?Do you have a question about the New Holland Powerstar 120 and is the answer not in the manual?
General| Engine Power | 120 hp |
|---|---|
| Transmission | 12x12 Power Shuttle |
| Hydraulic System | Open center |
| Weight | 10, 450 lbs |
| Engine Cylinders | 4 |
| Rated Engine Power | 120 hp |
| Displacement | 3.4 L |
| Front Axle | 4WD |
| Fuel Tank Capacity | 140 liters |
| Wheelbase | 2600 mm |
Basic safety rules, fuel supply, and DEF tank filling.
Procedure for starting the engine.
Procedure for stopping the engine.
Start-up, low idle, loader installation/removal, and bucket installation/removal.
Machine stability, safety, installation, and operations.
Emissions, safety, introduction, dealer service, body, coolant, SCR, and fuel specs.
Detailed checks and cleaning procedures for various components like AC, brakes, and fuel systems.
Procedures triggered by warning messages, like air cleaner and fuel filter service.
Tasks to be performed every 10 hours or daily, including engine checks and greasing.
Maintenance tasks like tightening, checking, and cleaning after the first 50 hours.
Greasing and cleaning tasks for specific components every 50 hours.
Cleaning tasks for AC condenser, coolers, and filters every 100 hours.
Viewing and identifying error codes.
Troubleshooting hydraulic, engine, electrical, and hitch systems.
Load limits for front and rear axles.
Load limits for the drawbar.
Overall technical specifications of the tractor.
Specific details for the front loader and bucket.
Defines the tractor's purpose and lists safety precautions.
To Next Page