New Holland Super Boom L150 User Manual

New Holland
Super Boom
™
Skid Steer Specifications
L150 L160 L170 L175 L180 L185 L190
Page 1 of 1
MODEL L150 L160 L170 L175 L180 L185 L190
E
NGINE
Make and model, New Holland N843H N844 N844T NH844LT 334/M2 334T/M2 445/M2
Type of fuel...............................................................................................................................................Diesel..........................................................................................................
Gross power @ RPM, hp (kW) 38 (28) @ 3200 46 (34) @ 2900 52 (39) @ 2900 60 (45) @ 2900 63 (47) @ 2300 78 (58) @ 2300 80 (60) @ 2300
Net power @ RPM, hp (kW) 36 (27) @ 3200 44 (33) @ 2900 50 (37) @ 2900 56 (42) @ 2900 59 (44) @ 2300 72 (54) @ 2300 74 (55) @ 2300
Peak torque, lb.-ft. (N-m) @ RPM 73 (99) @ 1700 101 (137) @ 1700 113 (153) @ 1700 128 (174) @ 1700 179 (243) @ 1400 228 (309) @ 1400 236 (320) @
1400
Number of cylinders 344 4334
Displacement, cu. in. (l) 91 (1.5) 121.7 (2.0) 121.7 (2.0) 135.3 (2.2) 204 (3.4) 204 (3.4) 274 (4.5)
DRIVE TRAIN
Max travel speed, fwd, mph (kph) 7.3 (11.8) 7.3 (11.8) 7.3 (11.8) 5.9 (9.5) 6.9 (11.1) 6.9 (11.1) 7 (11.3)
-with 2 speed transmission,
mph (kph) NA NA NA 10 (16.1) 11.3 (18.2) 11.3 (18.2) 11.4 (18.3)
Drive chain size 50/80 HD 80 HD 80 HD 80 HD 100 HD 100 HD 100 HD
Tire size 10.00x16.5 10.00x16.5 10.00x16.5 12.00x16.5 12.00x16.5 12.00x16.5 14.00x17.5
HYDRAULICS
Total flow, gpm (l/min) 11.6 (43.9) 15.1 (57.2) 17.2 (65.1) 17.2 (65.1) 19.3 (73.1) 19.3 (73.1) 21.9 (82.9)
Main relief pressure, psi (kPa) 2500 (172) 2500 (172) 2500 (172) 2550 (176) 3050 (210) 3050 (210) 3050 (210)
Optional high flow, gpm (l/min) NA NA 30.3 (114.7) 30.3 (114.7) 34.7 (131.3) 34.7 (131.3) 37.3 (141.2)
PERFORMANCE / LOADER ARMS
Linkage geometry.................................................................................................................................Vertical lift ......................................................................................................
Rated operating load, lbs. (kg) 1,350 (612) 1,600 (726) 1,765 (801) 2,000 (907) 2,200 (998) 2,500 (1134) 2,800 (1270)
Bucket breakout force,, lbf (kN) 3,500 (1591) 3,712 (1687) 3,712 (1687) 4,312 (1956) 6,034 (2737) 7,670 (3479) 7,670 (3479)
Boom break out force, lbs. (kg) 2,400 (1089) 2,828 (1285) 2,828 (1285) 3,003 (1362) 4,194 (1902) 4,836 (2194) 6,229 (2825)
Max. dump angle at full height, degrees 45 45 45 43 45 45 45.3
Dump clearance at full height
discharge, in. (mm) 87.9 (2230) 92.1 (2340) 92.1 (2340) 95.4 (2420) 100 (2540) 100 (2540) 102 (2590)
Dump reach at full height
discharge, in. (mm) 25 (640) 29 (740) 29 (740) 29 (740) 32.5 (830) 32.5 (830) 32.3 (820)
Max. hinge pin height, in. (mm) 114.3 (2900) 115.5 (2930) 115.5 (2930) 119.7 (3040) 124.6 (3160) 124.6 (3160) 125.6 (3190)
Bucket rollback at carry position, degrees 36 37 37 37 37 37 37
DIMENSIONS
Length with bucket down, in. (mm) 120 (3050) 125 (3180) 125 (3180) 129.5 (3290) 139 (3530) 139 (3530) 145.7 (3700)
Width with bucket, in. (mm) 60 (1520) 60 (1520) 66 (1680) 72 (1830) 72 (1830) 72 (1830) 78 (1980)
Width over tires, in. (mm) 60 (1520) 65.6 (1670) 65.6 (1670) 70.8 (1800) 71.25 (1810) 71.25 (1810) 76.4 (1940)
Height to top of ROPS, in. (mm) 73.4 (1860) 74.8 (1900) 74.8 (1900) 76 (1930) 77 (1960) 77 (1960) 79.6 (2020)
Wheelbase, in. (mm) 37.5 (950) 42.5 (1080) 42.5 (1080) 42.5 (1080) 48 (1220) 48 (1220) 51.5 (1310)
Ground clearance, in. (mm) 8.25 (210) 7.4 (190) 7.4 (190) 8.4 (210) 8 (200) 8 (200) 10.1 (260)
OTHER FEATURES
Standard ROPS Tilt forward Tilt forward Tilt forward Tilt back Tilt forward Tilt forward Tilt forward
Self leveling bucket....................................................................................................................................Std. ..........................................................................................................
OPERATING WEIGHT, lbs. (kg) 4,500 (2042) 5,534 (2510) 5,540 (2513) 6,230 (2826) 7,095 (3218) 7,100 (3220) 7,755 (3518)
SERVICE CAPACITIES
Fuel tank, gal. (l) 8.75 (33) 14.4 (55) 14.4 (55) 14.4 (55) 18 (68) 18 (68) 21.5 (81)
Cooling system, gal. (l) 2.45 (9.3) 2.7 (10.2) 2.7 (10.2) 4.5 (17) 4.5 (17) 4.5 (17) 4.5 (17)
Hydraulic system total, gal. (l) 5 (18.9) 8.6 (32.6) 8.6 (32.6) 8.6 (32.6) 15 (57) 15 (56.8) 15 (56.8)
L150 - Equipped with 60" 11.5 cu. ft. dirt and foundry bucket and 10.00 x 16.5 tires L180 - Equipped with 72" 17.1 cu. ft. low profile bucket and 12.00 x 16.5 tires
L160 - Equipped with 60" 11.5 cu. ft. low profile bucket and 10.00 x 16.5 tires L185 - Equipped with 72" 16.7 cu. ft. dirt and foundry bucket and 12.00 x 16.5 tires
L170 - Equipped with 66" 15.2 cu. ft. dirt and foundry bucket and 10.00 x 16.5 tires L190 - Equipped with 78" 25.8 cu. ft. dirt and foundry bucket and 14.00 x 17.5 tires
L175 - Equipped with 72" 17.1 cu. ft. low profile bucket and 12.00 x 16.5 tires
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).

New Holland Super Boom L150 Specifications

General

Brand	New Holland
Model	Super Boom L150
Category	Compact Loader
Language	English

Summary

Engine Specifications

Make and Model

Specifies the manufacturer and model name of the engine used in the skid steer.

Gross Power

Indicates the engine's maximum power output in horsepower (hp) and kilowatts (kW) at specific RPM.

Net Power

Shows the engine's net power output in hp and kW at specified RPM, accounting for engine accessories.

Peak Torque

Details the maximum torque produced by the engine in lb-ft and N-m at a given RPM.

Number of Cylinders

States the number of cylinders in the engine.

Displacement

Specifies the engine's total volume swept by all pistons in cubic inches and liters.

Drive Train Specifications

Max Travel Speed

Indicates the maximum forward travel speed in miles per hour (mph) and kilometers per hour (kph).

Drive Chain Size

Specifies the size or type of the drive chain used in the transmission system.

Tire Size

Details the recommended tire size for the skid steer loader.

Hydraulic System Specifications

Total Flow

States the total hydraulic fluid flow rate in gallons per minute (gpm) and liters per minute (l/min).

Main Relief Pressure

Indicates the maximum operating pressure of the hydraulic system in psi and kPa.

Optional High Flow

Specifies the hydraulic flow rate available with an optional high-flow system.

Performance and Loader Arms

Linkage Geometry

Describes the type of loader arm linkage, such as 'Vertical lift'.

Rated Operating Load

Specifies the maximum load the skid steer can safely lift and operate with, in pounds (lbs) and kilograms (kg).

Bucket Breakout Force

Indicates the maximum force the bucket can exert to break into material, in pounds-force (lbf) and kilonewtons (kN).

Boom Break Out Force

Shows the maximum force the lift arms can exert, in pounds (lbs) and kilograms (kg).

Max Dump Angle

Specifies the maximum angle the bucket can tilt forward at full height, in degrees.

Dump Clearance

Indicates the maximum height the bucket can clear when fully dumped, in inches (in.) and millimeters (mm).

Dump Reach

Shows the maximum horizontal distance the bucket can reach when fully dumped, in inches (in.) and millimeters (mm).

Max Hinge Pin Height

Specifies the maximum vertical height of the loader arm's pivot point, in inches (in.) and millimeters (mm).

Bucket Rollback

Indicates the bucket's tilt angle at carry position, in degrees.

Dimensions

Length with Bucket Down

Measures the overall length of the skid steer with the bucket in its lowest position, in inches (in.) and millimeters (mm).

Width with Bucket

Specifies the overall width of the skid steer including the bucket, in inches (in.) and millimeters (mm).

Width Over Tires

Indicates the overall width of the skid steer measured over the tires, in inches (in.) and millimeters (mm).

Height to Top of ROPS

Shows the maximum height from the ground to the top of the Rollover Protective Structure (ROPS), in inches (in.) and millimeters (mm).

Wheelbase

Measures the distance between the center of the front and rear axles, in inches (in.) and millimeters (mm).

Ground Clearance

Specifies the minimum distance between the lowest point of the chassis and the ground, in inches (in.) and millimeters (mm).

Other Features

Standard ROPS

Indicates the standard safety feature of a Rollover Protective Structure (ROPS).

Self Leveling Bucket

Notes whether the skid steer is equipped with a self-leveling bucket system.

Operating Weight

Operating Weight

Specifies the total weight of the skid steer loader in operating condition, in pounds (lbs) and kilograms (kg).

Service Capacities

Fuel Tank Capacity

States the fuel tank's capacity in gallons (gal.) and liters (l).

Cooling System Capacity

Indicates the capacity of the engine's cooling system in gallons (gal.) and liters (l).

Hydraulic System Total Capacity

Specifies the total fluid capacity of the hydraulic system in gallons (gal.) and liters (l).