New Holland W80 User Manual

W50 - W60
W70 - W80
WHEEL LOADER
Workshop Manual
Print No. 604.13.577 English
V - 2005
THIS ALERT SYMBOL SIGNALS IMPORTANT MESSAGES INVOLVING YOUR SAFETY.
Read and heed carefully the safety instructions listed and follow the precautions recommended to
avoid potential risks and to safeguard your health and your safety.
You will find this symbol in the text of this Manual referred to the following key words:
WARNING - Cautions directed to avoid improper repair interventions involving potential consequences
for the safety of the personnel performing the repairs.
DANGER - These warnings qualify specifically potential dangers for the safety of the operator or other
persons directly or indirectly involved.
IMPORTANT NOTICE
All maintenance and repair interventions explained in this Manual must be performed exclusively by the
Service Organisation of the Manufacturer, observing strictly the instructions explained using, whenever
necessary, the recommended specific tools.
Whoever performs the operations reported without following exactly the precautions is responsible on his own,
for the damages that may result.
Neither the Factory nor any Organisations in its Distribution Network, including but not limited to national,
regional or local distributors, are responsible for any liability arising from any damage resulting from defects
caused by parts and/or components not approved by the Factory for use in maintaining and/or repairing prod-
ucts manufactured or merchandised by the Factory.
In any case, no warranty of any kind is made or shall be imposed with respect to products manufactured or
merchandised by the Factory, when failures are caused by the use of parts and/or components not approved
by the Factory.

New Holland W80 Specifications

General

Brand	New Holland
Model	W80
Category	Compact Loader
Language	English

Summary

Fundamental Safety Instructions

Warnings and Symbols

Explains safety symbols used in the manual for important information and warnings.

Risks Resulting from Failure to Observe the Safety Instructions

Details potential dangers and consequences of not following safety rules for operator and machine.

Organizational Measures

Covers essential organizational steps for safe operation, including personnel and site management.

Selection and Qualification of Personnel

Operation, Safety Instructions

Maintenance, Safety Instructions

Warning of Special Dangers

Transporting and Towing; Recommissioning

Repairs, Safety Instructions

Accumulators

Engine

Welding Operations

Foreword

SI- and Additional Units

Quantities of Space and Mass

Presents units for length, area, volume, density, inertia, and specific volume in SI and old units.

Time Related Quantities

Lists units for time, frequency, speed, acceleration, volume flow, mass flow, and heat flow.

Quantities of Force, Energy and Power

Details units for force, pressure, mechanical stress, energy, heat capacity, power, and torque.

Conversion Tables

Conversion for Units of Length

Provides conversion factors between various units of length like inches, feet, meters, and miles.

Conversion for Units of Area

Offers conversion factors for area units such as square inches, square feet, and square meters.