Newacalox 8786D - User Manual

NEWACALOX 878D/8786D
SMD REWORK STATION User Manual
welcome to use newacalox 878D soldering station. This manual will show
the parameters, performance, usage and precautions of this machine.
If you have any problem of usage or any suggestion about this soldering
station, please send the email to support@newacalox.com, thank you.
Warranty :
1: HEAT GUN Accessories and soldering iron accessories if broken within
a month can send a replacement by connecting with after service.
(support@newacalox.com)
2:If the gadgets in the package are lost, please contact us for reissue,
thank you.
3:We will guide you carefully about the use and maintenance of this
product.
Our products 878D soldering station use the brush-less fan,and long life
and low noise.It is very good for repair phone and PCB.Please read this
operating instruction manual carefully before using the serial products of our
company.Thank you!
If you like our product, can you share your experience or review for it on
Amazon. It can help us a lot,thanks in advance.
Matters Needing Attention :
1. Be careful not to burn yourself when using it because it is hot.
2. make sure that you have connected the heat gun handle to the station before turn
on it. And Only can unplug the heat gun after trun off station. Otherwise, it will burn
out the heat gun handle and damage the main machine of the rework station.
3. When you stop using soldering station, please don’t disconnect the plug
immediately when you turn off the power button of soldering station. And this
soldering station will automatically shut down as soon as it stop blowing wind.
Otherwise you will shorten the life of soldering station. And please remove the
plug if you do not use this station for a long time.
4. when using this station for the first time, please use it in a ventilated environment.
Keep the heat gun away from your eyes. When the oil is exhausted, the heat gun
will no longer have an unpleasant smell.

Summary

Matters Needing Attention

Safety Precautions

Covers essential safety guidelines for operating the soldering station, including burn prevention and proper handle connection.

Product Features

Key Features Overview

Details the primary features of the rework station, such as digital display, microcomputer control, and various included accessories.

Technical Specifications

Provides detailed technical specifications including model, power, airflow, temperature range, size, weight, and noise level.

Application Usage

Describes the essential applications for the rework station in electronics repair, focusing on component soldering and desoldering.

Operation Instructions

Heat Gun Component Operation

Step-by-step guide for assembling, setting up, and operating the heat gun part of the rework station.

Stand-by Mode Functionality

Explains the stand-by mode, including cool-down procedures, temperature memory, and auto shut-down features.

Soldering Iron Component Operation

Instructions for assembling, turning on, setting temperature, and operating the soldering iron.

Frequently Asked Questions (FAQ)

S-E Error Troubleshooting

Details the common S-E error, its causes (sensor issues, connection problems), and suggested fixes.

H-E Error Troubleshooting

Explains the H-E error, likely related to heating element failure or connection issues, and troubleshooting steps.

High Airflow Issues

Addresses potential problems with excessive airflow and provides recommendations for adjustment.

PCB Damage Prevention

Offers advice on preventing PCB damage, such as component dislodging, when using the hot air function.

Rework Techniques and Issues

Component Removal Tips

Provides guidance on safely nudging components to avoid pulling pads during rework.

Nozzle Handling

Addresses issues with tight nozzles and suggests methods for removal and adjustment to prevent burns.

Common Rework Scenarios

Lists and explains various rework situations, including polarized components, tombstone parts, cold joints, and missing components.

Accessories and Maintenance

Included Accessories List

Catalogues the various accessories provided with the rework station, such as tweezers, extractors, nozzles, and tips.

Heating Element Replacement

Detailed instructions on how to test and replace the heating element for both the soldering iron and heat gun.

Newacalox 8786D Specifications

General

Power	700W
Display	LED
Hot air gun temperature range	100°C - 480°C
Soldering iron temperature range	200°C - 480°C
Airflow	120L/min