6
newair.com
• Do not place anything in the interior when not in use. The appliance is not
designed to store other items.
• Appliance is intended to be used in household and similar applications, such
as staff kitchen areas in shops, offices, and other working environments;
farm houses and by clients in hotels, motels, and other residential type
environments; bed and breakfast type environments; catering and similar
non-retail applications.
• To use this product, place it on a flat surface.
• After unpack the ice maker, DO NOT turn on the Ice Maker. Wait 24 hours to
stabilize the refrigerant inside the ice maker before first time use.
• Please make sure that the rear drain is firmly plugged before adding water to
the water tank.
• The ice cubes produced will be relatively small at first. Do not be concerned
as this is not a defect. The unit will take a few cycles to produce the intended
size.
• Do not use near heat or excessive dust.
• Do not immerse machine in water, use it in bathrooms or places where it
may be splashed with water.
• Do not dismantle or modify machine.
• If a problem occurs, stop using the machine immediately.
• Avoid touching any parts involved in ice making, and leave the lid closed
while running ice production cycle.
• To unplug appliance do so by holding the head of the plug. Never pull by the
cord.
• Periodically clean any accumulated dust off the plug head.
• Do not plug in the unit’s power cord if hands are wet.
• Disconnect the power supply and drain out the remaining water from the
rear drain if ice maker will not be used for an extended period.
• We suggest using an ice maker cleaning agent or citric acid to clean
appliance before first use to avoid resulting ice from having dirt and/or odor
due to machine components being manipulated during assembly. If not
cleaned before use resulting ice may have dirt and/or odor that will
disappear after several cycles. DO NOT consume any ice with dirt and/or an
odor. This is not a defect.
• Do not alter cooling circuit (piping).
To Next Page
Loading...
Need help?
General
