How to fix a loud noise coming from my NewAir Water Dispenser?
If your NewAir Water Dispenser is making a loud noise, it's likely due to uneven footing. Ensure that the unit is placed on a flat, even surface to resolve this issue.
Why is my NewAir WCD-200W not dispensing hot or cold water?
If your NewAir Water Dispenser isn't providing hot or cold water, it might be because too much water was used in a short period. Give it some time and then try again. Also, ensure the dispenser is properly connected to power, with the switch ON and the plug securely in the socket.
What causes electrical leakage in a NewAir WCD-200W?
If you suspect an electrical leakage with your NewAir Water Dispenser, ensure that the plug is properly grounded. A poor connection can cause electrical leakage.
Essential practices for safe use and handling of the water dispenser, including what to do and avoid.
Mandatory grounding requirements and precautions to prevent electrical shock hazards.
Instructions for environmentally responsible disposal of the water dispenser and its components.
Visual identification of all components with numbered labels for easy reference.
Guidance on selecting a suitable location for the water dispenser, considering stability and environment.
Steps for installing a water bottle and performing initial cleaning before first use.
Routine cleaning procedures for the exterior, drip tray, and storage cabinet.
Procedures for cleaning internal water tanks to maintain hygiene and performance.
General| Water Temperature Options | Hot, Cold, Room Temperature |
|---|---|
| Loading Type | Bottom Loading |
| Water Bottle Capacity | 3 or 5 Gallon |
| Material | Plastic |
| Color | White |
| Power Consumption (Hot) | 500W |
| Heating Power | 500 Watts |
To Next Page