Note: As steam is very hot, never attempt to remove
creases from a garment while it is being worn, always hang
garments on a clothes hanger.
Accessories
The fabric brush allows removing
lint, pet hair, dust, dirt and dander
on overcoat and down jacket.
To attach: While the brush and
steamer are cool, align the fabric
brush to the steam head and lock it
into position.
To remove: Allow the steamer to
cool prior to removing the brush.
Put your finger under the pointed tip
and lift it up.
1. Plug in the appliance.
2. Wait at least 35 seconds before
pressing the steam button. The power
indicator light flashes red to indicate
that the heating element is working.
When the indicator light becomes
solid red, the steamer is ready to use.
Use
- 05 -
To Next Page