It is recommended to use de-mineralized or distilled water.
Never use water containing additives (starch, perfume, aromatic
substances, softeners, etc.), or condensation water (for example
water from tumble dryers, water from refrigerators, water from air
conditioning units, rainwater). This water contains organic waste
materials or minerals that concentrate under the effect of heat
and cause spitting, brown coloring or premature ageing of your
steamer.
What Water To Use?
1. Open the water inlet cap. Fill the
water tank with water (See section
"what water to use"). Never exceed
the maximum level.
2. Close the water inlet cap.
3. Push the water tank back into the
steamer as shown until it clicks into
place. (an audible "click" will be heard
when correctly locked).
To remove: Push the water tank in the
arrow direction until a click is heard.
Take the detachable water tank out to
refill water easily.
Before Use
- 04 -
To Next Page