Newbealer NB316A User Manual (English)

Questions and Answers:

R
Richard BrownAug 6, 2025
Why is my Newbealer Steam Cleaner not producing enough steam?
- A
  Amanda WalkerAug 7, 2025
  If your Newbealer Steam Cleaner isn't producing enough steam, there are several possible causes: * Ensure the steamer is correctly plugged in. * The water level might be too low; unplug the steamer and refill it. * The water tank may not be fully in place; make sure the cover is closed and the tank snaps into place. * There might not be enough water in the tank; fill it to the Max level as per the instructions. * The steamer may not be heated to full temperature; always allow it to preheat until the power indicator light becomes solid.
C
Christopher MackAug 14, 2025
What to do if my Newbealer NB316A is leaking water?
- J
  jeremy08Aug 14, 2025
  If your Newbealer Steam Cleaner is leaking water, it could be due to the following reasons: * The water tank may not be fully in place, or the cover might not be closed properly. Ensure that the cover is closed and that the water tank snaps when put into place. * The water tank might be overfilled. Fill the water tank to the Max level, and avoid overfilling.
S
Sarah GomezAug 22, 2025
Why does my Newbealer NB316A spit water?
- M
  michelle20Aug 22, 2025
  If your Newbealer Steam Cleaner is spitting water, it could be due to these reasons: * The steamer isn't heated to full temperature before use. Always allow the steamer to preheat until the power indicator light becomes solid before steaming. * There's remaining water after the last use, which became condensation water and is stored in the steam head. After each use, empty the water tank.
D
David MarshallAug 29, 2025
What causes calcium build-up in my Newbealer NB316A Steam Cleaner?
- D
  derekkirbyAug 29, 2025
  Calcium build-up in your Newbealer Steam Cleaner can occur due to a few reasons: * You might be using water with additives. Never add any additives to the water tank. * The water may be too hard. Read carefully the “What water to use” section. * The appliance hasn't been rinsed enough after descaling. Read carefully the ‘ANTI CALC’ section in instructions for use.