25
Only 3 items actually get dirty when you are cooking, the lid, the steam outlet and the
recipient, and therefore these three parts are the ones that need to be cleaned:
• Lid: The lid can be wiped with a damp cloth or with a little washing-up liquid and suds.
• Steam outlet: This can be wiped with a damp cloth or with a little washing-up liquid and
suds.
• Recipient: The inner recipient is made from aluminium and features a revolutionary,
high-durability non-stick coating. Therefore cleaning it has been made simple because
the food hardly sticks to it. You can use a damp cloth or a sponge with a little soap. If
you want to wash it in the dishwasher, you may.
Sometimes, the plastic housing gets dirty, which you may clean with a damp cloth. If you
spill food inside the housing, clean it will a cloth, taking into account that if water enters, it
can short-circuit and aect the functioning of the cooker.
IMPORTANT! It is advisable to change the silicone ring seal and clean the valves once a
year, depending on how often you use the cooker. Please contact an authorised service
centre when you have had the multi-purpose cooker for more than one year.
Cleaning and Maintenance of the Cooker
TROUBLESHOOTING
Error E1 Error E2 Error E3 Error E4 Error E5
Down sensor fail Down sensor circuit fail Up sensor fail Up sensor circuit fail Overheating
Turn o the robot, let cool a few minutes and reschedule. If the error persists, contact a technician.
To Next Page
Loading...
