22
than 20 PSI and a max of 35 PSI. Tyres without the correct amount of air pressure
can reduce performance, increase tyre wear and make riding unsafe. As well as
making sure the tyres are properly inflated you should also check for any damage to
the tyre. Replace the tyre if there is significant wear or damage. If your wheels are
not spinning straight or become untrue or spokes loosen, do not attempt to true or
tighten unless you have adequate knowledge, tools and experience. It is
recommended that a certified, reputable bike shop performs all wheel tuning.
Replacement tyres and inner tubes can be purchased directly from our online
accessories store. www.newgenbikes.com
MOTOR
Ensure hub motor is spinning smoothly and motor bearings are in good working
order. Ensure all power cables running to hub motor are secured and undamaged.
Make sure the hub motor axle bolts are secured and all torque arms and torque
washers are in place.
CLEANING
Make sure to remove the battery before cleaning and maintaining the bike. Clean
the frame like any other vehicle you own with soap and water, using a soft cloth so
as not to scratch paint. Take care to not spray electronic components directly with
liquids. Keep the battery dry, wipe the battery down with a dry clot to clean it. Do
not submerge the bike, hub motor or battery in water.
To Next Page
Loading...
