Newgen 345 - Repairs & Maintenance Schedule

23
REPAIRS &
MAINTENANCE-SCHEDULE
Many components on your 345 are highly stressed, and with high mileage and hard
riding these components over their life time can become fatigued and fail. Failure
can cause injury so it’s very important you check and service your 345 regularly to
ensure these parts function as intended and are replaced if necessary. When
replacing safety-critical components including but not limited to the Frame, Fork,
Tyres, Rims, Brakes, Front and Rear Lights, Kickstand, Handlebar, Stem, Drivetrain,
Battery, or Control Unit/Display, genuine replacement parts should be used to
ensure they work safely with your electric bike.
INTERVAL
COMPONENTS
SERVICE
100 – 200
MILES
- Check hardware for proper
torque.
- Check drivetrain for proper
alignment and function.
- Check wheel trueness
- Check for any Tyre or rim
damage
- Check frame for any damage
- Clean the frame
with a damp
cloth
- Initial break-in
period, have the
bike serviced by
reputable bike
store
250 – 750
MILES
- Check brake pad alignment and
pressure point on brake lever
- Check hardware for proper
torque.
- Check gears are shifting
correctly
- Check chain stretch
- Check shifter cables for
corrosion or fraying
- Clean and
lubricate
drivetrain
- Check crank set
and pedal
torque
- Clean brakes
and shift cables
750 – 1250
MILES
- Check drivetrain
- Check hardware for proper
torque.
- Check brake pad alignment and
pressure point on brake lever
- Check shifter cables for
corrosion or fraying
- Take bike in to
reputable bike
store for a
service.