Instructions
Newlec Helpline: 0800 783 6909
IMPORTANT: Before replacin the battery ensure the heater is isolated from the electricity
supply. NOTE - Battery should be disposed of in an appropriate manner
3
4
2
1
5
Battery positive side up
Fi. 5
This product is fitted with a replaceable battery in the controls. To replace the battery, follow
the steps below, shown in Fi. 5:
1. Unhinge the heater from the wall using the clips shown in Fi. 2 and locate the battery
module
2. Slide the catch and pull module from the controls.
3.
Remove the coin cell battery and replace with a new 3.3V type CR2032, T85°C coin cell
battery.
4. Slide module back in place, ensuring clip is engaged.
Battery Replacement
26
To Next Page
Loading...
