Q Series Quick Start Guide
1. You will need an HDMI cable and a USB cable to connect a
computer.
2. Plug in one end of the HDMI cable into one of the HDMI ports.
3. Plug in one end of the USB cable into the matching port.
4. Take the other end of the HDMI port and plug it into the HDMI port
on your computer.
5. Take the other end of the USB port and plug it into the USB port on
your computer.
6. Once both cables have been plugged into the display and the
computer, the matching port should turn white on the Source
Preview on the Home Screen.
Connecting a Computer with USB & HDMI
The Front Ports
1. You will need a USB Type-C cable to connect a computer.
2. Plug in one end of the USB-C cable into the front USB-C port.
3. Take the other end of the USB-C port and plug it into the USB-C
port on your computer.
4. Once both cables have been plugged into the display and the
computer, the matching port should turn white on the Source
Preview on the Home Screen.
Connecting a Computer with USB-C
Switching Sources
Switching Sources
There are ve ports located on the bottom left-hand side of the front of
the panel: USB Touch, HDMI, USB 3.0, USB Type-C, and mic-in.
7
To Next Page
Loading...
