6.11 Angle of the backrest
• Electrical Adjustment
For the electrical adjustment of the tilt of the backrest, refer to pages 32 and 36 of the owner’s manual according to the
corresponding command.
• Manual Adjustment
To adjust the tilt of the backrest you must be:
1 Press the 2 button located at the end of the pin 1 then remove to release the
adjusting bar 3.
2 Screw toward the top the bar 3 to increase the tilt of the backrest or unscrew
downward to decrease the tilt of the backrest.
3 Reposition the bar 3 in its holder and replace the pin 1 by pressing the button
again 2.
To Next Page
Loading...