Why is there no sound on my NewMedia Solutions Set-top box?
If there's no sound on your NewMedia Solutions Set-top box, here's what to check: * First, make sure the program isn't muted by pressing the MUTE button. * Increase the volume by pressing VOLUME UP. * Try switching to another channel to see if the audio works there. * Also, verify that your A/V cables are properly connected.
What to do if the NewMedia Solutions Set-top boxes remote control is not working?
If the remote control for your NewMedia Solutions Set-top box isn't working, try these steps: 1. Replace the batteries in the remote control. 2. If that doesn't work, power off the Set-top box, wait 30 seconds, and then power it back on.
How to fix no signal on TV from NewMedia Solutions ETA Stereo Set-top boxes?
If there is no signal on the TV from your NewMedia Solutions Set-top box, ensure that all cables are connected properly and that the correct source is selected on the TV.
What to do if NewMedia Solutions ETA Stereo is hung?
If your NewMedia Solutions Set-top box is frozen, power it off, wait 30 seconds, and then power it back on.
General| Brand | NewMedia Solutions |
|---|---|
| Model | ETA Stereo |
| Category | Set-top boxes |
| Language | English |
Guidelines for safe usage of the power supply, including voltage and cord handling.
Recommendations for using certified cables and placing the STB away from hazards.
Instructions for cleaning the STB and ensuring proper ventilation to prevent overheating.
Warnings against liquid exposure and small objects falling into ventilation holes.
Procedures for antenna disconnection, proper earthing, and lightning protection measures.
Advice against self-repair and guidance to contact a distributor or service center.
Details the functions of the front panel components like power, channel controls, and display.
Illustrates the rear connections for antenna, audio, video, USB, and power.
Explains the purpose of each button on the remote control for operating the set-top box.
Step-by-step guide for connecting the set-top box to an HD television using HDMI.
Instructions for connecting the set-top box to an SD television using AV cables.
Accesses the Media Player to view recordings, videos, music, and image files from a USB device.
Allows editing TV and Radio channel lists, including favorites, locking, skipping, and moving.
Enables scanning for available channels, including quick scan and full scan options.
Configure language, TV system, display, time, parental lock, and audio description settings.
Access information, factory reset, games, and firmware upgrades via OTA or USB.
Details on adding favorites, locking, skipping, moving, editing, and sorting channels.
Displays program information and allows recording or setting reminders for selected shows.
Allows setting schedules for recording or viewing programs, including frequency and duration.
Enables pausing, rewinding, and fast-forwarding live TV or recorded content.
Procedure to program the set-top box remote to control TV power and volume.
Defines common abbreviations and terms used in the manual, such as DVB-T2, EPG, and STB.
Provides solutions for problems like no channels, missing sound, unresponsive remote, or no signal.
To Next Page
