Step 3 – (Optional) Update Your Firmware
We encourage you to keep the firmware on your device up to date. Updates may contain bug-fixes, provide
improved performance, or even enable new features.
FIGURE 5
The update process is not complicated – simply follow the steps listed below:
7. Download and unzip the most recent firmware update archive to extract the ‘.bin’ file.
8. Click the Device Settings tab at the top of TCMI4KUHD’s webpage and compare the Firmware
Version shown to the number in the filename of the firmware version you downloaded. If the
download has a higher revision number, continue below to perform the update.
9. Click the Update Firmware button and click Choose File to show a file explorer.
10. Use the file explorer to locate the firmware .bin file, and follow the prompts to perform the update.
The device will reboot during this process, which can take up a few moments. Please be careful not to
interrupt power to the device during the update process.
11. Following a firmware update, we recommend performing a Restore operation. A recessed Reset
button is located at left on the device’s rear connector panel, or you can use the Restore function
from the web page.
Hint: On some web browsers, you may occasionally need to clear the browser’s cache (history) to see the
result of a firmware update or Factory Reset. Also, please note that it can take a minute or two before the
NDI channel name shown in TriCaster refreshes.
The IP address of the device can change as a result of a Restore operation. You may need to use
TriCaster to locate the device on the network and log in again afterward. Also, if you have
previously set a manually configured IP address for the unit, you will need to reconfigure the IP
settings again following a Restore operation.
Hint: Should you set a custom password and then forget it, you can reset the device to factory defaults
using the Factory Reset process.
Conclusion
This completes the initial setup of your NewTek™ TCMI4KUHD. You should see its output displayed on
Studio Monitor. The sections that follow provide more in-depth coverage of features and options.
To Next Page
Loading...
General