Operating manual
Model: LBST-604
Brightness sensor transmitter (learning code system)
FEATURES:
Sense environment brightness (darkness) at certain level to switch on/off receiver connected lamp.
Easy to install. Standing on the table or hanging on the wall.
Delay-off time design (7 selections: 2h-3h-4h-5h-6h-7h-8h) and “0” is for non-setting delay-off time.
Battery low indicator inside LED lens.
IP56 waterproof approved.
Compatible to all ARC SELF PROGRAM (LEARNING) system receivers (LYCR-300/1000/3500, LCMR-300/1000, LWMR-
210/230, LBUR-100/101, LMLR-300) operating ON/OFF function not dimming.
BUTTON/SWITCH/BATTERY LOW INDICATOR:
1. START button:
Two alternatives of environment brightness (darkness) setting.
1). Press START button for 1 second:
choose the ex-factory pre-set up brightness level – 10 lux.
2). Press START button and hold for 3 seconds:
learn the actual environment brightness level.
2. LEARN Set/Del switch:
“Set” means set LBST-604 code with compatible receiver.
“Del” means delete LBST-604 code with compatible receiver.
To Next Page
Need help?
General
