If not change the set up brightness, LBST-604 will be ON and work “ON” function with receiver at the same set up
brightness level the next day and the same procedure as the former day.
2h: when LBST-604 “ON” at (under) certain set up brightness level and works “ON” function with receiver which connected
lamp light ON lasting for 2 hours. (Within the 2 hours, object light (car light, for example) will not influence LBST-604 to
switch off receiver). After the 2 hours, LBST-604 just sends “OFF” signal to receiver to switch off connected lamp. If not
change the set up brightness, LBST-604 will be ON and work “ON” function with receiver at the same set up brightness
level the next day and the same procedure as the former day.
3h: etc.
To Next Page
Loading...
