Nexa LDR-075 - Page 6

COMPATIBILITY
This receiver works with all selearning
Nexa transmitters.
TECHNICAL SPECIFICATIONS
FUNCTIONALITY
Receiver for controlling 12-24 V LED with built-in
driver.
• Power supply input
• Maximum load
• RF frequency
• RF range
• Standby power consumption
• Memory addresses
12-24 VDC
75 Watt
433.92 MHz
Up to 30 m indoor/up to 70 m outdoor (optimal conditions)
0.5 Watt
6
EN
INFORMATION
WIRELESS RADIO SIGNAL
• The 433.92 MHz radio signal passes through walls, windows and doors.
• Indoor range: up to 30 m. Outdoor range: up to 70 m. (optimal conditions)
• The range is strongly dependent on local conditions, such as the presence of metals. For
example, the thin metal coating in Low-emissivity (Low-E) glass has a negative impact on the
range of radio signals.
• There may be restrictions on the use of this device outside the EU. If applicable, check whether
this device complies with local directives.
6