INSTALLATION
Wire colors may vary per country. Contact an
electrician when in doubt about wiring. The
module contains 2 voltage-free switches. This
makes it possible to switch low-voltage motors.
Never connect 230 VAC wires to low-voltage
wires, as it can result in defects, a short circuit
or re.
MAXIMUM LOAD
Never connect lights or equipment that exceed
the maximum load of the receiver, as it can
result in defects, a short circuit or re.
SHOCK HAZARD
Exercise caution when installing a receiver.
Voltage may be present, even when a receiver
is switched o.
LIFE-SUPPORT
Never use Nexa products for life-support
systems or other applications in which
equipment malfunctions can have life-
threatening consequences.
INTERFERENCE
All wireless devices may be subject to
interference, which could aect performance.
The minimum distance between 2 receivers
should be at least 50 cm.
REPAIRING
Do not attempt to repair this product. There are
no user-serviceable parts inside.
WATER-RESISTANCE
This product is not water-resistant. Keep it dry. Moisture
will corrode the inner electronics and can result in a
short circuit, defects and shock hazard.
CLEANING
Use a dry cloth to clean this product. Do not
use harsh chemicals, cleaning solvents, or
strong detergents.
HANDLING
Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and
ne mechanics.
ENVIRONMENT
Do not expose the product to excessive heat
or cold, as it can damage or shorten the life of
electronic circuit boards.
EN
SAFETY
7
To Next Page
Loading...
Need help?
General
