Nexgrill 720-0882S User Manual (English)

Other manuals for Nexgrill 720-0882S

Questions and Answers:

M
Marcus RodriguezSep 8, 2025
What to do if my Nexgrill Gas grill only heats to 200-300 degrees?
- S
  Sandra OwensSep 8, 2025
  If your Nexgrill Gas grill is only heating to 200-300 degrees, check the fuel hose for bends or kinks. Ensure the grill area, burner, and orifices are free of dust, spiders, and insects. The regulator may have a safety device restricting gas flow, even without a leak. To reset it, turn off all burners and close the LP tank valve. Disconnect the regulator, wait one minute, then reconnect and slowly fully open the LP tank valve. Light all burners and monitor the temperature.
M
michaelmonroeAug 23, 2025
What to do if the rotisserie burner of my Nexgrill Gas grill will not light?
- N
  Nathaniel KimAug 23, 2025
  If the rotisserie burner on your Nexgrill Gas grill won't light when pushing the igniter button, check for debris blocking the electrode. Verify there's a spark jumping from the electrode to the burner. If no spark is seen, check the battery inside the igniter box. Also, check to ensure the gas is on.
A
Anne BlackAug 25, 2025
How to fix a Nexgrill 720-0882S Grill that won't light immediately?
- H
  heather28Aug 25, 2025
  If your Nexgrill grill doesn't light immediately, ensure you see a spark while lighting the burner. Check the battery installation and wire connections to the electrode assembly. Clean the wires and electrode with rubbing alcohol and a clean swab, then wipe with a cloth. Check if other burners operate; if so, inspect the malfunctioning burner's gas orifice for obstructions.
M
Mary MarshAug 26, 2025
How to fix Nexgrill 720-0882S Grill rotisserie burner that won't light?
- E
  Elizabeth SuarezAug 26, 2025
  If the rotisserie burner on your Nexgrill grill won't light when you push the igniter button, check for debris blocking the electrode. Also, check for a spark jumping from the electrode to the burner. If there's no spark, check the battery inside the igniter box by turning it counter-clockwise. Finally, if the infrared back burner does not light when attempting to light with a match, ensure the gas is on.
D
davidtaylorAug 27, 2025
How to fix Nexgrill Grill that will not light immediately?
- K
  Kimberly MerrittAug 27, 2025
  If your Nexgrill grill doesn't light immediately, ensure you see a spark while lighting the burner. Check the battery installation and wire connection to the electrode assembly. Clean the wire(s) and electrode with rubbing alcohol and a clean swab, then wipe with a clean cloth. If other burners work, inspect the gas orifice on the malfunctioning burner for any obstructions.
T
tbennettAug 29, 2025
What to do if the rotisserie burner on my Nexgrill 720-0882S Grill won't light?
- S
  Sherry YoungAug 29, 2025
  If the rotisserie burner on your Nexgrill grill won't light when you push the igniter button: * Check for debris blocking the electrode. * See if a spark jumps from the electrode to the burner. If there's no spark, check the battery inside the igniter box by turning it counterclockwise. Also, ensure the gas is on.
M
Michael CameronSep 14, 2025
What to do if my Nexgrill Grill regulator makes noise?
- H
  Harold WoodsSep 14, 2025
  If the regulator on your Nexgrill grill is making noise, the vent hose might be plugged, or the regulator could be faulty. Ensure the vent hole on the regulator is not obstructed. Clear the hole, close the gas control valves, wait ten minutes, and restart. Check your flames for proper performance. If the flames are still not correct, consider replacing the regulator.
L
lucaszacharySep 10, 2025
Why does my Nexgrill Gas grill regulator make noise?
- R
  rachel77Sep 10, 2025
  The noise from your Nexgrill Gas grill regulator may be due to a plugged vent hose or a faulty regulator. Check if the vent hole on the regulator is obstructed and clear it if necessary. Close the gas control valves, wait ten minutes, and restart. Observe the flames for proper performance; if they're not correct, consider replacing the regulator.
N
Nicole MartinezSep 7, 2025
How to fit a full-size cover on my Nexgrill Grill?
- B
  brandonwardSep 7, 2025
  The cover might be incorrect for your grill or it may be a tight fit. Ensure it’s the correct length by measuring it left to right and comparing it to the grill's measurement. Check the location and size of the cover's hood portion against your grill. Spread the cover and let it relax, ideally in warm sunlight or a warm room. For grills with a side shelf, bunch the cover like a sock and put it on from left to right.
V
Vanessa LopezSep 4, 2025
What to do if my Nexgrill Grill only heats to 200-300 degrees?
- V
  Vincent KirbySep 4, 2025
  If your Nexgrill grill only heats to 200-300 degrees, check the fuel hose for bends or kinks. Ensure the grill area, burner, and orifices are free of dust, spiders, and insects. The regulator might have a safety device activated, restricting gas flow even without a leak. To reset it, turn off all burners, close the LP tank valve, disconnect the regulator, wait one minute, reconnect, slowly open the LP tank valve fully, then light all burners and check the temperature.