Brightness: Adjust from 0~100.
Contrast: Adjust from 0~100.
Sharpness: Adjust from 0~15.
Flip-H: Switch to On to flip the image horizontally, switch to Off to
restore to normal.
Flip-V: Switch to On to flip the image vertically, switch to Off to
restore to normal.
B&W Mode: Switch to Color, B&W (Black and White) mode.
Gamma: Switch to Default, 0.34, 0.39, 0.47, 0.5.
Low-Light Mode: Switch to On / Off.
NR-2D: Toggle the 2D Noise Reduction On / Off or adjust it
between 1-7.
NR-3D: Toggle the 3D Noise Reduction On / Off or adjust it
between 1-8.
5. Noise Reduction
Move the pointer to the (Noise Reduction) in the Main menu, click
the OK button and enter the (Noise Reduction menu) as shown
below:
NOISE REDUCTION
→NR-2D
NR-3D 4
OFF
[↑↓]Select [← →]Change Value
[Menu ] Return
US 01EN 12
To Next Page
