Nexigo NS32 User Manual

3. After switching to a wired connection the wireless
connection will automatically disconnect.
4. After unplugging the wired connection the
controller will automatically attempt to reconnect to
the last paired device.
limitations in a game while using the DirectInput
mode. When using this mode the 1st and 4th player
indicator LEDs will remain permanently lit indicating
this is the active mode.
c. Switch mode for connecting with a Switch console.
When using this mode only the player indicator LED
for your controller position will remain permanently
lit indicating this is the active mode.
FACTORY RESET
To reset the controller, press and hold the Home
button for at least ten seconds. The controller will be
powered off and will then reset itself. You need to
re-pair the controller to your devices using the
methods outlined above.
10s
Reset
13

Nexigo NS32 Specifications

General

Brand	Nexigo
Model	NS32
Category	Controller
Language	English