Safety Information
For your safety, read this manual thoroughly before operating your Blue-
Link™ unit.
Your Blue-Link™ unit is intended for use by properly trained, skilled
professional heavy-duty technicians. The safety messages presented below
and throughout this user’s manual are reminders to the operator to exercise
extreme care when using this test instrument.
There are many variations in procedures, techniques, tools, and parts for
servicing vehicles, as well as in the skill of the individual doing the work.
Because of the vast number of test applications and variations in the
products that can be tested with this instrument, we cannot possibly
anticipate or provide advice or safety messages to cover every situation. It is
the heavy-duty technician’s responsibility to be knowledgeable of the
system being tested. It is essential to use proper service methods and test
procedures and to perform tests in an appropriate and acceptable manner
that does not endanger your safety, the safety of others in the work area, or
vehicle or equipment being tested.
It is assumed the operator has a thorough understanding of vehicle systems
before using the Blue-Link™ unit. Understanding of these system principles
and operating theories is necessary for competent, safe and accurate use of
this instrument.
Before using the Blue-Link™ unit, always refer to and follow safety
messages and applicable test procedures provided by the manufacturer of
the vehicle or equipment being tested. Use equipment only as described in
this manual.
Read, understand and follow all safety messages and instructions in this
manual and on the test equipment. Safety messages in this section of the
manual contain a signal word with a three-part message and an icon. The
signal word indicates the level of the hazard in a situation.
To Next Page
Loading...