Nexo GEO M1210

TECHNICAL SPECIFICATIONS
GEOM1210-I - GEOM1220-I Page 15 / 20
TECHNICAL SPECIFICATIONS
GEOM12 WITH NEXO ELECTRONICS
Model
GEOM12
Frequency range (±6dB)
50Hz – 20kHz
Sensibility (1W / 1m)
105dB SPL Nominal
Peak SPL Level (1m)
140dB
Operating voltage
50 Vrms (180 Vpeak)
Vertical Dispersion
10° for GEOM1210
20° for GEOM1220
Horizontal Dispersion
80° or 120° (with magnetic flanges GMT-FLGM12)
Crossover Frequency
LF-HF : 1.1kHz Passive
Nominal Impedance
Active mode: (8Ω LF - 16Ω HF) – Passive mode: 8 Ω
Recommended Amplification
Active mode: (1250W LF + 650W HF) – Passive mode: 1250 W per cabinet
CARACTÉRISTIQUES
Model
GEOM12
Components
LF: 1x 12’’ - 8Ω - Long excursion – Neodymium driver with PDD
TM
HF: 1x3” voice coil 1.4’’ throat driver on a BEA/FEA optimized HRW
TM
Material
Lightweight polyurethane composite
Finish
Black or white structural paint
Front finish
Black or white acoustic fabric fitted front steel grille
Fittings
2 Side handles horizontal
Back grip
Connectors
2 x cable gland with 4 cores cables
Weight
34 kg – 75 lb
Dimensions