EasyManua.ls Logo

nexstyle 4OSA015BST - OPERATIONS; General Operating Precautions; CLEANING; Cleaning and Maintenance

nexstyle 4OSA015BST
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
operaTions
1. Read all instructions in this manual before operating this appliance.
2. Always leave safety grills and lters in place. Without these components,
operating blowers could catch on to hair, ngers and loose clothing.
3. NEVER dispose of cigarette ashes, ignitable substances, or any
foreign objects in blowers.
4. NEVER leave cooking unattended. Use caution when cooking with oil.
Overheating may cause oil to reach its ash point and ignite. Used oil
will ignite at lower temperatures than fresh oil.
5. Constantly monitor deep-fryers during use, as overheated oil may ignite.
cleaning
Do not operate blowers when lters are removed.
1. The saturation of greasy residue in the blower and lters may cause
increased ammability. Keep this appliance clean and free of grease
and residue build-up at all times to prevent possible res.
2. Filters must be cleaned periodically and kept free from accumulation
of cooking residue (see cleaning instructions inside). Old and worn
lters must be replaced immediately.
3. NEVER disassemble parts to clean without proper instructions. Parts
should be disassembled by qualied persons only.
4. DO NOT spray any liquid cleaner on hood surface including lights and
control switch. To clean the range hood, spray liquid cleaner directly
onto cleaning cloth for hood cleaning.
The manufacture and distributors decline all responsibility in the event of failure to
observe the instructions given here for installation, maintenance and suitable use
of the product. The manufacturer and distributors further decline all responsibility
for injury due to negligence and the warranty of the unit automatically expires due
to improper installation and/or maintenance.
safeTy noTe:
Remove PVC lm before installation. Always wear workman safety gloves
for installation, cleaning, light bulb changing and dismantling to reduce
the risk of injury.