Next Level Racing ERS2 - Step 08: Access Front ERS2 Seat Holes; Step 09: Secure Middle ERS2 Seat Sliders; Step 10: ERS2 Seat Installation Complete

support@nextlevelracing.com
PARTS:
•
• NIL
08
Lift up the Seat Slider Lever and slide the ERS2 Seat all the way back to access the front holes.
PARTS:
•
• NIL
10
Your ERS2 Seat installation is complete.
PARTS:
•
• 2 x M8 20mm Low Profile Bolts
•
• 2 x Steel Seat Spacers
09
Align the middle Seat Slider holes with the Steel Seat Spacers. Bolt through and secure with 2 x M8
Low Profile Bolts.
14