Next Level Racing ES1 - To Mount Your Own Seat Rails See Below; Bolt Seat Bracket to Underside of Seat; You Can Now Bolt Seat Slider to Cockpit of Your Choice; Assistance

8 9
support@nextlevelracing.com
Video Instruction: bit.ly/nlrbuild
1.0
2.0
BOLT SEAT BRACKET TO UNDERSIDE OF SEAT
YOU CAN NOW BOLT SEAT SLIDER TO COCKPIT OF YOUR CHOICE
YOU WILL REQUIRE
4 X 20MM M8 BOLTS
4 X WASHER
WARNING
ASSISTANCE
ASSEMBLY
VIDEO
bit.ly/nlrbuild
If you require further support with your product please
contact our friendly team at: support@nextlevelracing.com
Please do not use power tools for assembly as over tightening can damage your seat and hardware.
Make sure all mounting points are aligned correctly to avoid twisting your seat or frame.
TO MOUNT YOUR OWN SEAT
RAILS SEE BELOW