20
21
Install large mouse plate(1) using the plastic spacers(2) between the flight plate and adjuster plate
securing with washers and nuts(3)
Remove bolt from front leg on the large mouse plate side
22
23
Install large mouse plate support bar with M5 60mm bolt through the front leg. Line up the slot in the
large plate with the support pole
Secure support pole to large mouse plate using the square neck bolt and wingnut supplied
16 17
support@nextlevelracing.com
Video Instruction: bit.ly/nlrbuild
1
2
3
PARTS
4 x M6 FULLY THREADED STUDS
4 x PLASTIC SPACER
4 x M6 FLANGE NUTS
4 X WASHER
PARTS
NIL
PARTS
1 x M6 SQUARE NECK BOLT
1 x WINGNUT
PARTS
1 x M5 60MM
1 x WINGNUT
To Next Page