Need help?Do you have a question about the Next Level Racing Wheel Stand DD and is the answer not in the manual?
Connect the main frame components using M8 x 15mm bolts.
Attach support beams using M8 x 20mm bolts.
Install the top support structure using M8 x 50mm bolts.
Secure the base frame with M8 x 60mm bolts.
Attach the pedal plate using M8 x 20mm bolts.
Mount the side support arms using M8 x 15mm bolts.
Attach hand brake and shifter plates with M8 x 60mm bolts and spiked washers.
Attach plastic feet or castor wheels to the base.
Reinforce the pedal structure using M8 x 110mm bolts.
Adjust pedal plate angle and length for optimal positioning.
Modify the wheel mounting angle for preferred setup.
General| Foldable | No |
|---|---|
| Color | Black |
| Dimensions (Folded) | Not Foldable |
| Compatibility | Direct Drive Wheels |
| Material | Carbon steel |
| Adjustability | Height and Angle Adjustable Wheel and Pedal Positions |
To Next Page
