Next Level f-gt simulator cockpit - Frame Assembly Steps; Step 1: Frame Assembly; Step 2: Front Plate Attachment; Step 3: Support Post Installation

For assistance please contact: support@nextlevelracing.com
www.nextlevelracing.com
F-GT SIMULATOR COCKPIT
Step 1: FRAME ASSEMBLY
1 X 16MM BOLT
Repeat both sides
Step 2:
Step 3:
1 X 50MM BOLT.
Repeat both sides.
Install SUPPORT POST on third hole from front for GT and last hole for Formula
2 X 50MM BOLTS
Repeat both sides
SUPPORT POST
SIDE FRAMES
FLOOR POSTS
FRONT PLATE