Don'ts
We suggest you retain these instructions for future reference. Do not tighten screws until fully assembled.
Keep fittings out of children's reach and keep children well away
Do not over tighten screws or bolts.
from construction area.
Do not drag or pull your furniture.
Do not use this product if parts are missing, damaged or worm.
Never use scourers, abrasives or chemical cleaners.
Please do not stand on your furniture.
Number of people required to assemble
Avoid exposing the furniture to excessive heat or direct
Two persons are required to assemble this product.
sunlight as this can cause deterioration of the colour.
Time to assemble
Do's
We suggest you spend a short time reading through this leaflet
BEFORE YOU START
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Unwrap all packaging materials and place the components
on a clean surface to protect them from damage.
We recommend that the packaging is used to protect the
If you are missing any fixtures and fittings for your product
surfaces during assembly.
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
Carefully check that you have all the parts before beginning
to you free of charge.
assembly.
Home service technicians
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use. Check fixings regularly If you have a fault with your product please contact our
to ensure they remain tight.
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
When moving your assembled bed. It is best to lift the bed refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
rail is securely fixed in place. If you have had the product for more than 28 days we will send
an independent home service technician to review and repair
When adjusting the support legs ensure that the foot is set the product where possible and recommend further action.
5mm from the floor surface without the mattress in place.
When in use the legs will create the required support for
You can write to us at
Next Retail Ltd,
Never allow any kind of liquid to remain on your furniture. Desford Road,
Absorption can cause materials to warp or finishes to
de-laminate. LE19 4AT,
To clean your item, please use a vacuum or lightly brush clean.
To view our full furniture range please visit www.next.co.uk
2
and never to drag it. Please check that the centre support
Home Customer Services
necessary.
Please periodically check all fittings and re-tighten as
This product should only by used on firm ,level ground.
Produced in China for Next Retail Ltd.
Assembly instructions
BARKLEY STORAGE BED KING
904273/905142/978108-2015-V1
904273/905142/978108