Need help?Do you have a question about the Next MINT+ Series and is the answer not in the manual?
General| Brand | Next |
|---|---|
| Model | MINT+ Series |
| Category | Portable Generator |
| Language | English |
Shows UPS status including input voltage, output voltage, load, and battery level.
Includes Up/down, Mute, and ON/OFF buttons for operating the UPS.
Features a USB charging port and a HID-compliant communication port.
Includes surge-protected outlets and battery backup outlets.
Covers AC power input connection and cooling vents.
Protects the UPS from overcurrents and short circuits.
Press and hold ON/OFF button for 2 seconds to change state between Standby and Line.
Press and hold Mute button for 1 second to mute or unmute audible alarms.
Click the Up/down button to cycle through displayed information.
Shows input/output voltage, frequency, battery voltage, power, backup time, and load.
Indicates Line Mode, AVR Mode, Battery Mode, and Mute status.
Displays battery level, low battery warnings, and load percentage.
Shows overload indicators, battery replacement needs, fault codes, and high battery voltage.
Turn off equipment and UPS, unplug input cable, and remove battery cover screws.
Disconnect battery connector and slide out the old battery pack carefully.
Slide in the new battery pack, verify polarity, and reconnect connectors.
Reinstall cover, ensure normal operation, and dispose of old batteries properly.
Battery mode output high (internal fault).
Output short (check the loads).
Over Charge Voltage or Low battery voltage.
Overload fault.
Input voltage, range, output voltage regulation, transfer time, and waveform.
Details charging time and operating humidity.
Lists POWER, Batteries, Dimension, and Net Weight for MINT+ series models.
To Next Page