- 7 -
Using Your Digital Picture Frame
View pictures from memory cards
Step 1: Install the magnetic stand for tabletop display or prepare a mount on the wall.
Step 2: Power on the unit by either:
1: Connecting it to an electronic socket through the provided power adapter.
2: Connecting it to a computer through the provided USB cable.
Step 3: Insert a memory card into the card slot at the bottom of the unit (with the card’s electrical
contacts facing the front of the unit.).
Step 4: Press the UP or DOWN button to select “PHOTO”on the main menu, and press the
ENTER button to enter the photo viewer mode.
Step 5: You will see thumbnails of all of the pictures on the card.
Press the MODE, UP, and DOWN buttons to select a thumbnail. Press the ENTER button
to confirm the selection and enlarge the selected picture to fill the screen.
Step 6: In full-screen mode (Single Show Mode):
Press the MODE button to start the automated slide show. In slide show mode, you can
press the MODE button repeatedly to set the time interval between slides. Press the ESC
button to stop slide show and return to the menu.
To Next Page
Loading...
