13
In Vehicle Installation (cont.)
10 Connect Rear Facing Camera
With your Dash Cam turned OFF, simply plug the Rear View Camera into your Dash Cam using
the socket on the right hand side, ensuring that the lens is facing backwards, into your vehicle.
Ensure that the Dash Cam is turned OFF with no power being supplied.
10
MENU
MODE
MENU
MODE
8 Attach the Adhesive pad to the windscreen
Firmly press the adhesive pad to the clean area of windscreen.
Press for 5 seconds to ensure a strong bond between the pad and windscreen.
Note: When positioning the pad on the windscreen, ensure that the thick end is pointing down,
with the ‘notch’ at the bottom. This will allow you to attach the mount the correct way up.
9 Reattach the mount to the adhesive pad
Ensure that the adhesive pad is securely attached to the windscreen.
Slide the mount back onto the pad, moving from left to right.
A click will be heard when the mount connects to the pad
Check that the mount is securely attached.
5s
!
8
9
To Next Page
Loading...
Need help?
General
