To Next PageTo Next PageHow to fix NextBase Click 9 Lite DVD Player when it has no power?
If the LED is not lit, start by checking the fuses inside the cigarette plug by removing the tip and replacing any blown fuse with one of the same rating. Ensure the stanchion mount is correctly connected, as the player lacks an internal battery. Clean the contacts on the rear of the screen and the mount using a cotton bud and alcohol-based fluid.
What to do if my NextBase Click 9 Lite has no sound?
If there is no sound, begin by turning up the volume wheel on both the DVD player and the monitor. Also, verify that all settings and connections to the player are correct.
Why is my NextBase DVD Player unable to play the disc?
The disc may not play for several reasons. First, ensure the disc is loaded correctly with the label side up, pressed firmly onto the rotating spindle. Second, check the disc for scratches or fingerprints and clean it if necessary. Finally, confirm that you are using the correct regional disc for your player.
What to do if NextBase DVD Player has no display?
If your NextBase DVD Player shows no display, check that the AV cable is firmly connected. Also, verify that all settings and connections are correct, and ensure the input mode is set appropriately.
How to fix NextBase Click 9 Lite DVD Player remote control that doesn't work?
If the remote control isn’t working, the most likely cause is an exhausted battery. Replace the battery to resolve this issue.
How to get image on second screen of NextBase DVD Player?
To get an image on the second screen, first ensure the stanchion mount is correctly connected and that the Cable Yo Yo is in place, as this cable is essential for image and sound display on the second screen. Additionally, clean the contacts on the rear of both screens and the mount using a cotton bud and alcohol-based fluid.
Why my NextBase Click 9 Lite is unable to play the USB files?
If your NextBase DVD Player cannot play USB files, it might be due to an incompatible file format or errors on the USB drive. Try reformatting the USB drive with FAT32 and ensure that the media files are of a compatible type, as described in the manual.
Why is my NextBase Click 9 Lite DVD Player unable to charge?
This is normal, as the Click Lite DVD player or monitor does not have an internal battery. To operate the player, connect it to car power, mains power, or an optional external battery.
What to do if NextBase DVD Player display has lines?
Any diagonal lines indicate that the screen has been smashed. Contact your NEXTBASE repair agent for details of the LCD panel replacement cost.
General| Brand | NextBase |
|---|---|
| Model | Click 9 Lite |
| Category | DVD Player |
| Language | English |
Details the function of each button on the main player unit for navigation and control.
Identifies and explains the purpose of various ports on the player for connectivity.
Details the primary functions of the remote control buttons.
Covers navigation, playback controls, and special function buttons on the remote.
