To Next PageTo Next PageHow to fix NextBase Click 7 Duo DVD Player when it has no power?
If the LED is not lit, start by checking the fuses inside the cigarette plug by removing the tip and replacing any blown fuse with one of the same rating. Ensure the stanchion mount is correctly connected, as the player lacks an internal battery. Clean the contacts on the rear of the screen and the mount using a cotton bud and alcohol-based fluid.
What to do if my NextBase DVD Player has no sound?
If there is no sound, begin by turning up the volume wheel on both the DVD player and the monitor. Also, verify that all settings and connections to the player are correct.
Why is my NextBase DVD Player unable to play the disc?
The disc may not play for several reasons. First, ensure the disc is loaded correctly with the label side up, pressed firmly onto the rotating spindle. Second, check the disc for scratches or fingerprints and clean it if necessary. Finally, confirm that you are using the correct regional disc for your player.
What to do if NextBase Click 7 Duo DVD Player has no display?
If your NextBase DVD Player shows no display, check that the AV cable is firmly connected. Also, verify that all settings and connections are correct, and ensure the input mode is set appropriately.
How to fix NextBase DVD Player remote control that doesn't work?
If the remote control isn’t working, the most likely cause is an exhausted battery. Replace the battery to resolve this issue.
How to get image on second screen of NextBase Click 7 Duo?
To get an image on the second screen, first ensure the stanchion mount is correctly connected and that the Cable Yo Yo is in place, as this cable is essential for image and sound display on the second screen. Additionally, clean the contacts on the rear of both screens and the mount using a cotton bud and alcohol-based fluid.
Why my NextBase Click 7 Duo DVD Player is unable to play the USB files?
If your NextBase DVD Player cannot play USB files, it might be due to an incompatible file format or errors on the USB drive. Try reformatting the USB drive with FAT32 and ensure that the media files are of a compatible type, as described in the manual.
Why is my NextBase Click 7 Duo DVD Player unable to charge?
This is normal, as the Click Lite DVD player or monitor does not have an internal battery. To operate the player, connect it to car power, mains power, or an optional external battery.
What to do if NextBase Click 7 Duo display has lines?
Any diagonal lines indicate that the screen has been smashed. Contact your NEXTBASE repair agent for details of the LCD panel replacement cost.
General| Screen Size | 7 inches |
|---|---|
| Dual Screen Capability | Yes |
| Aspect Ratio | 16:9 |
| DVD Playback | Yes |
| Number of Screens | 2 |
| Supported Formats | DVD, CD, MP3, JPEG |
| Connectivity | USB, SD card slot |
| Screen Type | LCD |
| Region Code | Region 2 |
| Power Source | 12V car adapter |
| Mounting | Headrest mount |
Servicing instructions for qualified personnel only to reduce electric shock risk.
Do not expose device to rain, moisture, or liquids; no unqualified repairs.
Employs a laser; risk of eye injury. Only qualified personnel should service.
Liquid Crystal Display; requires qualified technician if exposed to water or malfunctioning.
Avoid moving player during playback to prevent disc damage due to high-speed spin.
Remove disc, turn off power, and unplug cord before transporting.
Select stable place near TV/stereo, away from magnetic devices, not on top of monitors.
Switch off player when not in use to avoid TV interference and noise problems.
Avoid extreme temperatures (-10°C to 60°C) to prevent warping or battery quality reduction.
Turn engine on before connecting car power cable for use.
Clean with soft dry cloth; use diluted neutral detergent for tough dirt, wring thoroughly.
Do not touch laser pickup lens to avoid damage; refer servicing to qualified personnel.
Press to pop up the OPTION menu for system settings.
Press to pop up the MODE menu for input settings. Default mode is DVD.
Press to fast backward playback or move to the left.
Press to fast forward playback or move to the right.
Press to open the cover.
Press to skip to previous track/chapter or move upwards.
Press to skip to next track/chapter or move downwards.
Press for 2 seconds to turn off, or press to stop playback/exit.
Press for 2 seconds to turn on, or press to start/pause playback/confirm.
Green light indicates the player is on.
Adjust volume up and down.
Insert a USB memory stick here; do not connect other devices.
Connect a video cable for video in/out.
Connect an audio cable for audio in/out.
Connect earphones or amplifier here.
Connect the included AC/DC adaptor here.
Lock/unlock the Click&Go Stanchion Mount.
Connect to the backplate ridge of Click&Go Stanchion Mount.
Green light indicates the monitor is on.
Turn the unit on or off.
Adjust screen brightness or dimmer.
Adjust volume up and down.
Connect earphones or amplifier here.
Lock/unlock the Click&Go Stanchion Mount.
Connect to the backplate ridge of Click&Go Stanchion Mount.
Press to move left, right, up, or down.
Press to pop up the OPTION menu for system settings.
Press to pop up the MODE menu for input settings.
Press to display DVD menu.
Press to change the audio language.
Press to fast backward playback.
Press to switch angle.
Press to repeat the playback.
Press to play particular track or for program setting.
Press to start/pause playback or confirm selection.
Press to stop playback or exit current operation.
Press to turn on/off the volume.
Press to change the subtitle.
Press to fast forward playback.
Press to arrange the playing order of tracks.
Press to set start/end points for repeated playback.
Select channel for optional IR headphone; default is Off.
Adjust Brightness, Color, and Screen Ratio.
Sub-menu for System, Language, and Digital Setup.
Select TV mode; default is Auto.
Set screen saver; default is On.
Adjust DVD aspect ratio.
Set/unlock parental control password for program access.
Set rating for programs; requires password to access.
Restore all settings to factory default.
Select display language; default is English.
Set subtitle display; default is Off.
Select sound effect.
Adjust line out compression for audio effects.
View DivX VOD registration code for renting/purchasing videos.
Display the disc's menu if applicable.
Display the disc's information if applicable.
Mute the sound; re-select to recover.
Set audio language if multi-languages are available.
Repeat a track or the entire disc; mode changes with ON/II.
Zoom the picture; rate changes with ON/II.
Play the disc inside the player and press ON/II to start playback.
Watch/listen contents from USB stick; press ON/II to load.
View movie from next player using Stanchion Mount and Cable YoYo.
View output from external device (e.g., game controller) connected to AV IN.
Valid for scenes with multiple angles; press to change angle.
Repeat a section between two points A and B.
Arrange chapters/tracks in preferred order via menu and number keys.
