To Next Page
E
ecookAug 17, 2025
How to fix blurred video on NextBase Camcorder?
- NNicole LivingstonAug 17, 2025
To fix a blurred video image on your NextBase Camcorder, remove the protective lens cover, clean the lens, and clean the wind deflector screen.
How to fix blurred video on NextBase Camcorder?
To fix a blurred video image on your NextBase Camcorder, remove the protective lens cover, clean the lens, and clean the wind deflector screen.
Why does my NextBase Ride BikeCam video have no sound?
If your NextBase Camcorder video has no sound, make sure the “Record Audio” setting is turned ON within the Video Menu. Note that the audio will be quiet on BikeCam.
What to do if I can't insert Micro SD card in NextBase Camcorder?
If you can't insert the Micro SD card into your NextBase Camcorder, align the card with the diagram shown on the device and insert the card until you feel a slight spring resistance. Then, push the card with your fingernail until you hear and feel a small latch. Release pressure, and the card will stay retained. Use the edge of a small coin if you have difficulty.
How to remove Micro SD card from NextBase Ride BikeCam?
To remove the Micro SD card from your NextBase Camcorder, push the card further inwards slightly with your fingernail until you hear and feel a small latch. If you have difficulty, use the edge of a small coin. Release pressure, and the card will spring out so you can take hold of it.
Why is my NextBase Ride BikeCam video playback jumpy?
If video file playback is jumpy on your NextBase Camcorder, remove the SD card and reformat it to remove non-contiguous files. For best recording, use a branded class 10 type (30MB/s) SD card of 8 to 32GB. The recommended video playback software is the supplied Driver Recorder Player Playback. If the PC may not be sufficient, try a different PC. Copy video files onto the PC / Mac for playback. It is not recommended to use the BikeCam as a card reader via the USB Cable for playback purposes.
Why can I only record a few minutes on NextBase Camcorder?
If you can only record a few minutes of video on your Micro SD card with your NextBase Camcorder, change the video length to a smaller size. You can also increase the size of the MicroSD card, up to a maximum of 32GB, or format the SD card on the BikeCam.
Why are my photos blurred on NextBase Ride BikeCam?
If your NextBase Camcorder photograph is blurred, hold the camera still while taking the photo. The photo is taken about 1 second after the shutter noise is heard.
What to do if NextBase Ride BikeCam video files can't be played?
If video files from your NextBase Camcorder can not be played, install the supplied Driver Recorder Player software and the additional Codecs if necessary.
Why does my NextBase BikeCam shut down by itself?
If your NextBase BikeCam shuts down by itself after a while, either the battery has gone flat, or there is no power to the BikeCam and the AutoPower Off period (which is in the General Settings Menu) has been triggered.
Why isn't Mass Storage or PC Camera working on NextBase BikeCam?
If the Mass Storage or PC Camera function does not work with your NextBase BikeCam, restart the PC, as this may be required for the necessary driver to be loaded correctly. Disconnect and reconnect the BikeCam. Contact NEXTBASE for the required driver.
General| Video Resolution | 1080p |
|---|---|
| Field of View | 140 degrees |
| Storage | Micro SD card (up to 128GB) |
| Water Resistance | Yes |
| Mounting | Handlebar mount |
| Frame Rate | 30fps |
| Connectivity | Wi-Fi |
Explains basic operating principles of the BikeCam.
Lists essential safety warnings and handling advice for the device.
Details specific warnings and restrictions related to product usage.
Lists all items included in the product packaging.
Highlights key functionalities and capabilities of the BikeCam.
Identifies and explains device screen and operation buttons.
Details LEDs, USB socket, RESET button, and card slot.
Describes base plate, LED torch, and camera lens.
Instructions on how to properly insert a MicroSD card into the BikeCam.
Details the connection of the 12-24Vdc cigarette plug power cable.
Guides on connecting the hard-wire power cable to the vehicle's power source.
Instructions for routing and tidying the hard-wire cable for safe installation.
Safety warnings and procedures for connecting to the vehicle battery.
Step-by-step guide for attaching the BikeCam using the supplied bar mount.
Details on using a professional RAM mounting system for the BikeCam.
Explains the function of buttons and LED indicators on the BikeCam.
Details the meaning of icons displayed on the screen during video recording.
Explains settings like Resolution, Exposure, and Audio Recording.
Covers GPS Stamp, Speed Stamp, Time Lapse, and Number Plate settings.
Details the icons displayed on the screen during photo capture.
Explains settings like Image Size, Colour, Capture Mode, and Quality.
Explains the screen layout and controls for video playback.
Explains the screen layout and options for photo playback.
Covers Wi-Fi, SD Card Formatting, Language, and Date/Time settings.
Details Default Settings, Auto Power Off, and version information.
Guide to downloading and installing the FinalCam app on an Android device.
Steps to turn on the Wi-Fi function on the BikeCam.
Instructions for connecting an Android phone to the BikeCam's Wi-Fi network.
Steps for adding the BikeCam to the app and accessing live view.
Explains the functions and features available on the app's home screen.
Covers changing SSID, password, video quality, and formatting.
Details storage management, language selection, and accessing downloads.
Explains the live image screen and basic controls within the app.
Describes accessing the file list and camera settings within the app.
Details how to play, pause, adjust volume, and manage downloaded videos.
Guide to downloading and installing the FinalCam app on an iOS device.
Steps to turn on the Wi-Fi function on the BikeCam.
Instructions for connecting an iOS phone to the BikeCam's Wi-Fi network.
Steps for adding the BikeCam to the app and accessing live view.
Explains the functions and features available on the app's home screen.
Covers changing SSID, password, video quality, and formatting.
Details storage management, language selection, and saving images.
Explains the live image screen and basic controls within the app.
Describes accessing the file list and camera settings within the app.
Details how to play, pause, adjust volume, and manage downloaded videos.
Explains how to use the BikeCam as mass storage or a webcam.
Details minimum system requirements and the player's capabilities.
Guides through the installation process, including .NET Framework.
Covers accepting the license agreement and initial setup.
Specifies the installation folder and confirms readiness to install.
Finalizes installation and provides notes on antivirus and icons.
Instructions on how to add video files and start playback.
Explains the various elements and data displayed in the playback window.
Details screen capture, file management, and GPS/map display options.
Details minimum system requirements and the player's capabilities for Mac.
Guides through downloading, uncompressing, and installing the Mac player.
Instructions on ejecting the player volume and locating the installed application.
Instructions on how to add video files and start playback on Mac.
Explains the various elements and data displayed in the playback window on Mac.
Details screen capture, file list, and GPS/map display options on Mac.
Solutions for blurred video, unplayable files, and choppy playback.
Addresses problems with power, SD card reading, and Wi-Fi connectivity.
Solutions for LCD condensation and file system errors.