NEXTLED NT-7543 - User Manual

OWNER’S INSTRUCTIONS
Folding Bar
LED Task Light
Model (NT-7543
The NextLED
®
Folding Bar LED Task Light Light is designed for
automotive maintenance or mechanical shop application. Keep
this manual for the safety warning and precaustions, assembly,
operating, inspection, maintenance and cleaning procedures.
Keep this manual and the receipt in a safe and dry place for
future reference.
CAUTION: Read all instructions and warnings before operating!
SAVE THESE INSTRUCTIONS!
WARNING: To avoid serious injury or death from electrical shock or fire:
1. This fixture MUST ALWAYS BE USED IN ACCORDANCE WITH
ALL ELECTRICAL AND SAFETY CODES AND ORDINANCES,
including the most recent National Electric Code (NEC) and with
the Occupational Safety and Health Act (OSHA) Volume 1 on
General Industry Standards and interpretations.
2. ALWAYS make certain that the power source conforms to the
requirements on the fixture.
3. DO NOT inspect or service the fixture while charging.
4. CAUTION: Keep dry. Do not open, drop, short-circuit, incinerate,
expose to temperatures higher than 140ºF, or charge/use
if damaged.
5. People with pacemakers should consult their physician(s) before
use. Electromagnetic fields in close proximity to heart pacemaker
could cause pacemaker interference or pacemaker failure
6. This fixture is not explosive-proof, DO NOT use in potentially
dangerous locations, such as in flammable or explosive
atmospheres.
7. NEVER operate the light with the clear protective glass
broken or removed.
8. NEVER LOOK DIRECTLY INTO LIGHT SOURCE. LED’s are
extremely bright and can damage eyes with prolonged exposure.
9.KEEP AWAY from heating vents, radiators, or other sources of heat.
10.KEEP OUT OF REACH OF CHILDREN.
11.INTENDED FOR INDOOR AND OUTDOOR USE.
LITHIUM BATTERY SAFETY WARNINGS
LITHIUM BATTERIES STORE A LARGE AMOUNT OF ENERGY
AND WILL VENT FIRE OR EXPLODE IF MISTREATED:
1. Keep work light dry.
2. DO NOT DO ANY OF THE FOLLOWING TO BATTERY PACK:
a.Drop
b.Open
c.Short-circuit
d.Puncture
e.Incinerate, or
f. Expose to temperatures greater than 140ºF.
3. Charge work light only according to these instructions
BATTERY REPLACEMENT
1. Unthread the base of the light.
2. Remove old battery, noting polarity
3. Insert a new 18650 type 3.7V, 2200mAh li-ion battery into the
light, positive end first
BATTERY CHARGING
WARNING: READ ENTIRE IMPORTANT SAFETY INFORMATION.
section at the beginning of this document including all text under
subheadings therein before set up or use of this product.
1. Insert the end of the charging cable into the charging jack,
located on the side of the handle, under a cover.
2. Plug charging cable into a powered USB port.
3. The charging indicator button will light up red during charging.
After approximately 4 hours the charging indicator turns green
indicating that the work light is charged and ready for use.
Unplug the charging cable.
OPERATING INSTRUCTIONS
WARNING: READ ENTIRE IMPORTANT SAFETY INFORMATION.
section at the beginning of this document including all text under
subheadings therin before set up or use of this product.
NOTE: before using work light for the first time, fully charge the
battery.
1. Press the button once to turn on the light.
2. Press the button again to switch to economy mode.
3. Press the button a third time to turn on the light on the
end of the bar.
4. Press the button a final time to turn the light off.
5. When finished using the work light, store indoors away
from children.
ONE YEAR LIMITED WARRANTY
If this NextLED
®
product fails due to a defect in materials
or workmanship, NextLED
®
will at its option, repair it or replace it
with the same or comparable model, free of charge.
For repair or replacement under warranty, return to the retail
establishment where the product was purchased.
This warranty give you specific legal rights and you may have other
rights that vary from state to state.
This warranty is void if damage or defect has resulted from accident,
abuse, misuse or faulty repair. In no event will NextLED
®
be liable for
any consequential, special, incidental, or indirect damages of any
kind arising out of the use or misuse of this product.
Maximum liability shall not in any case exceed the purchase price
of the product including shipping. Some states do not allow the
exclusion or limitation of incidental or consequential damages so
the above exclusions or limitations may not apply to you.
SPECIFICATIONS
Input Rating ......................... 5V DC (charger not included, sold seperately)
Light Output ........................300 Lumens (High)
50 Lumens (Low)
Run Time .............................2.5 Hours (High)
24 Hours (Low)
Battery ................................. Li-ion 18650 type, 3.7V, 2200mAh
Charging Time .....................Approx. 4 hrs. (based on 1A)
Water Resistance ................IPX4

Summary

Battery Replacement and Charging

Battery Replacement Steps

Instructions for unthreading the base, removing the old battery, and inserting a new 18650 type Li-ion battery.

Battery Charging Procedure

Steps for charging the LED task light via a USB port and indicator light status.

Operating Instructions

Light Operation Modes

How to turn the light on, switch to economy mode, activate end-of-bar light, and turn off.

Product Specifications and Warranty

Product Specifications

Details on input rating, light output, run time, battery type, charging time, and water resistance.

One Year Limited Warranty

Information on warranty coverage, repair/replacement process, and limitations.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The NextLED® Folding Bar LED Task Light (Model NT-7543) is a versatile lighting device designed primarily for automotive maintenance or mechanical shop applications. It offers a portable and adaptable illumination solution, emphasizing safety, ease of use, and durability.

Function Description:

This task light provides adjustable illumination for various work environments. It features multiple light modes, allowing users to switch between high and low brightness settings, as well as a focused light on the end of the bar for precise tasks. The folding design enhances its portability and allows for compact storage. The device is powered by a rechargeable lithium-ion battery, ensuring cordless operation, and includes a charging indicator to inform the user of its charging status.

Important Technical Specifications:

• Input Rating: 5V DC (charger not included, sold separately).
• Light Output:
  • High: 300 Lumens
  • Low: 50 Lumens
• Run Time:
  • High: 2.5 Hours
  • Low: 24 Hours
• Battery: Li-ion 18650 type, 3.7V, 2200mAh.
• Charging Time: Approximately 4 hours (based on a 1A charger).
• Water Resistance: IPX4.
• Battery Replacement: Utilizes a replaceable 18650 type 3.7V, 2200mAh li-ion battery.

Usage Features:

• Operating Modes: The light offers three distinct operating modes controlled by a single button:
  1. Press once to turn on the light (high brightness).
  2. Press again to switch to economy mode (low brightness).
  3. Press a third time to turn on the light on the end of the bar.
  4. A final press turns the light off.
• Portability: Its folding bar design makes it highly portable and easy to store, suitable for various indoor and outdoor applications.
• Charging: The device charges via a USB port. A charging indicator button illuminates red during charging and turns green when fully charged, typically after about 4 hours.
• Safety Warnings:
  • Must be used in accordance with all electrical and safety codes (NEC, OSHA).
  • Ensure the power source matches fixture requirements.
  • Do not inspect or service while charging.
  • Keep dry; avoid opening, dropping, short-circuiting, incinerating, or exposing to temperatures above 140°F.
  • Not explosive-proof; avoid use in flammable or explosive atmospheres.
  • Never operate with broken or removed protective glass.
  • Avoid looking directly into the light source due to extreme brightness.
  • Keep away from heat sources and out of reach of children.
  • Intended for both indoor and outdoor use.
  • Individuals with pacemakers should consult a physician before use due to potential electromagnetic interference.
• Lithium Battery Safety: Emphasizes keeping the work light dry and avoiding mistreatment of the battery pack, such as dropping, opening, short-circuiting, puncturing, incinerating, or exposing to temperatures above 140°F. Charging should only be done according to instructions.

Maintenance Features:

• Battery Replacement: The battery is user-replaceable. To replace, unthread the base of the light, remove the old battery (noting polarity), and insert a new 18650 type 3.7V, 2200mAh li-ion battery with the positive end first.
• Cleaning: The manual advises keeping the light clean and dry.
• Warranty: The product comes with a One Year Limited Warranty, covering defects in materials or workmanship. NextLED® will, at its option, repair or replace the product. The warranty is voided by damage from accident, abuse, misuse, or faulty repair. It explicitly states that NextLED® will not be liable for consequential, special, incidental, or indirect damages, and maximum liability will not exceed the purchase price of the product.

This NextLED® Folding Bar LED Task Light is designed to be a reliable and adaptable tool for professionals and DIY enthusiasts requiring focused and portable lighting in demanding environments.

NEXTLED NT-7543 Specifications

General

Brand	NEXTLED
Model	NT-7543
Category	Work Light
Language	English