What to do if the Nexto Di PHOTO ND2730 Storage ND2730 power cannot be turned on?
If the Nexto Di ND2730 does not turn on, it may be due to a discharged internal battery. Connect the AC power adapter and push the power button for more than 2 seconds.
What to do if multiple memory cards are inserted into the Nexto Di Storage ND2730?
Only one memory card should be inserted into the Nexto Di ND2730 at a time. If multiple cards are inserted, turn off the ND2730 using the recessed Reset key with a toothpick or paper clip.
How to turn off Nexto Di Storage ND2730 if the On/Off button doesn't work?
If the power on the Nexto Di ND2730 cannot be turned off via the On/Off button, press the recessed Reset key using a toothpick or paper clip.
Copies memory card contents to internal hard drive without a PC.
Supports installation, formatting, and testing of internal hard drives.
Details hazards, liability, and prohibited actions for user safety.
Details precautions regarding water, heat, cold, liquids, and electrical safety.
Warns against incompatible drives and emphasizes proper installation and formatting.
States that the ND2730 only works with FAT32 file system and one partition.
Guides the user through formatting a new hard disk drive.
Explains how the ND2730 compares memory card data with stored data.
Details the process of copying data from a memory card to the hard disk.
Describes how to compare data on the memory card with data on the hard drive.
Utility for detecting physical errors on the internal hard drive.
Setting for automatically copying memory cards upon insertion.
Procedure to upgrade the device's firmware.
Instructs to use the reset key for power issues and connecting the adapter if it won't turn on.
Advises on careful insertion and checking for bent pins for detection issues.
Explains that only the first card is detected and how to handle unrecognized messages.
To Next Page
General
