Need help?Do you have a question about the Nexto Di NEXTO NPS-10 and is the answer not in the manual?
General| Model | NPS-10 |
|---|---|
| Category | Storage |
| Capacity | Up to 1TB |
| Weight | 200 g |
| Interface | USB 3.0 |
| Display | 2.4-inch LCD |
| Card Slots | SD |
| Battery | Rechargeable |
| Compatibility | Windows, macOS, Android |
| Features | Backup |
Key safety guidelines and warnings for using the product to prevent injury or damage.
Details on copying and verifying data from memory cards to the device.
Explains backing up multiple cards sequentially and incremental backups.
Covers potential risks like unauthorized modification, battery hazards, and environmental conditions.
Advice on avoiding moisture, extreme temperatures, and keeping the product away from children.
Step-by-step guide for installing a 2.5-inch SATA HDD or SSD into the NPS-10.
Note that the installed hard drive must be formatted before use.
Using USB Type-C with chargers, battery packs, or computers.
Warnings against damaging the battery, short-circuiting, and proper charging practices.
Instructions for powering the device on and off, including auto power off.
Explanation of how to use the single control button for various functions.
Step-by-step guide to format the internal HDD or SSD using the device menu.
Details on exFAT format, data loss during formatting, and SSD secure erase.
How to insert CFast, CF, XQD, SD, and microSD cards into the device slots.
Step-by-step guide to copying data from memory cards to the internal drive.
Details on different copy modes: Fast Copy, Verify & Copy, and Safe Copy.
Methods for verifying copied data against the original memory card.
Information on error messages and how the device indicates failed operations.
Steps to update the device's firmware from memory cards or internal drive.
Solutions for problems with turning the device power on or off.
To Next Page
