Nexus Type 2 - Page 8

The difference is clear at www.evolutionaqua.com
NEXUS 210 / 310 UPGRADE KIT INSTALLATION
8 Install the inner centre column by placing it over the centre column of the Nexus and tighten
the jubilee clip provided. It is recommended that you run a bead of aquarium silicone around the
inside bottom edge of the stainless steel centre piece to enable a watertight seal.
9 Replace the K1 into the Eazy. Fill up to the level shown ensuring that the top grill on the Eazy Main
Body is still visible. Now clip on the clear lid.
10 Ensure the airline is connected. Fix airline to the lter using the clips provided as shown.
FIG.
9
FIG.
11
FIG.
10
FIG.
13
300
FIG.
12
200